Topics created by przemas

@przemas said in setting the offsets - table and probe:

Currently when I have maximum / minimum travels set up so the nozzle reaches every point on the build plate , the probe can't - and thus it is skipping points.
How do you fix that?

Do you have the physical room for the nozzle to move outside the bed area to allow the probe to reach the entire bed? If so, you can alter the M208 to allow that for probing. The M557 would still be the extents of the bed area only.

just in case anyone looks for the same thing. I've moved red and brown wire for bltouch from probe pins to pins 2 and 3 on the main pin connector. At same time moved white and black wires to appropriate pins on the probe connector.