Best posts made by rkaronde

@rkaronde Update after using this for over a month.

• Had 0 false triggers

• Twice caught actual issues, one was filament grinding leading to no movement. The other was actual jam. Was able to resume the print with grinding issue. For jam had to cancel the print, but saved a lot of time

• Have printed PLA, PETG, TPU, Wood fill. Different color (but really that does not matter). It is good to see different material being tracked well.

• Reprinted the Axel in Prusament ASA Galaxy Black. This improved the range reported to be more consistent 215-230% over really long prints as well.

@cncmodeller You can also try the iOS app.

The app does not allow any actions so should help with the view only aspect.

https://apps.apple.com/gb/app/duet-app-control/id1548032260

@fart_plume Can you provide more details on which filament monitor is being used, and how it is mounted?

Also did you follow the instructions here to make sure you have the right parameters set for M591?
https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_filament-out_sensors

@hekav What gcode is run at the end of the print? Anything from slicer or stop.g file?

Are there any more updates on when this will be available?

@fcwilt Adhesion is not a problem, and the first layer speed is slow 20mm/s.
Monotonic is just rectilinear if there are no other patterns in the first layer.

I used Hilbert Curve for the first time because I wanted to make the infill start from left side and go to right to make sure this is not an issue with bed leveling.

Check out this remix of the excellent design by Fractalenigneer to use a Duet3D Laser Filament Monitor.

https://www.thingiverse.com/thing:4796741

The filament tracking works well, and the readings during a long print were consistent between 190%-210%

@petriheino You can send M114 to get the current motor positions. This includes the step counts for each stepper motor and the bed correction applied.

I remixed the design by Fractalengineer to use the Duet3D Laser Filament Monitor, and it seems to be working well.
https://www.thingiverse.com/thing:4796741