Best posts made by SanderLPFRG

@jay_s_uk Wow I seriously have read over that 10 times I think. sorry for the unnessecary question
Thanks all!

@Notepad works really well, thanks!

Got good results too, and plotted them in graphs! which shows a fun correlation of the temperature drift of our probe!

Thanks for the script! Appreciate it

Hi all,

We have made a 3D printer with 2 micro-Z printhead axes (V and W), which move the IDEX printheads up and down 14mm to level 2 different tool types and automatically adjust/calibrate the printhead Z-offset.

We first got this system working with a microswitch type probe, which we, in a macro, temporarily reconfigured as an endstop for axis V/W, which we then "homed" towards the printed until triggered. When done for both tools, this calibrated the Z-offset automatically.

Now, however, we moved over to a loadcell probe (analog readout via configuring as scanning Z-probe, amplified and filtered with custom CAN-communicated PCB) which we cannot configure as an endstop to home towards.

My question is;
Is it possible to do a G30 S-1 probe (just probe and stop) with a probe number defined (K0/K1), but move axis V or W instead of the Z-axis

note;
running 3.6.0 beta-2

@SanderLPFRG Got it working, version mismatch.

@chrishamm It works!!

It both updated correctly, and now the M291 functions correctly.
Massive thanks Chris and Tony.

I'll now work on trying to understand how I can use the input to trigger Gcode commands

@gloomyandy said in Trying to fix my dual markforged (HAQ-XY) kinematics:

at it is probably not a good thing

Ill redesign the belt tensioning mechanism and the belt mounting, when measuring it indeed looks to be too loose
WIll see what this does

@jay_s_uk It is working, thanks!

@OwenD I did exactly that yesterday late afternoon. It is working now.

; Custom buttons
M950 J1 C"^io2.in"      ; define logical input for E1 filamentsensor
M581 P1 T2 S0 R2        ; define trigger for filament auto load (trigger2.g)
M581 P1 T4 S1 R1        ; define trigger for filament runout (trigger4.g)

Thank you very much both!

@OwenD Damn, this did the trick. Thank you so much owen! also thanks @chrishamm

@Notepad @droftarts ,

My goal is to test a shitload of probes, and see how much it starts to deviate after thousands. Your script might actually work, let me test