Posts made by scumdead

Good morning,
Thanks for the response, I'll be patient.

Thanks.

I dreamed, or did the message indicating that uart ports were currently not supported on expansion cards disappear?
( in 3hc documentatiln)
Thanks

Are there plans to make these ports accessible soon?
Thanks.

I would like to connect an MP3 player card, to announce the status of the printer for my visually impaired wife. This card connects to a UART port.

Thank you for your answers, the 2 uart ports on my 6hc card are already busy. Too bad we can't use all 3 of the 3hc...
Thanks.

Hello,
how to use uart ports on duet3 3hc (io 0,1,2)?
Thanks

Thank you, have a nice day

Hello,
Execonmcode does not work in 3.4.6?
It is however an essential plugin...

Thank you

Hello,
It is not possible to install it in 3.4.6?
Thank you.

@gloomyandy It was necessary to clear the cache of Firefox, everything is in 3.4.6 now. Thank you for your help. My new idex is fully functional: Super.

Hello,
After updating from 3.4.5 to 3.4.6, only dwc remained in 3.4.5. I used the procedure for SBC, I have all my cards in 3.4.6, except DWC. How to update it also?
Thanks for your help.

Sorry for my bad english...

Is there a missing M569 P9?

It works after: chown dsf etc/msmtprc.
Do not use sudo, otherwise the body of the message does not appear.
Thanks, with your plugin, my printers will notify their status now.

Thanks for the new version.
Msmtp does not seem to want to work, the msmtprc file cannot exist for the DSF user.

Thank you for your help.

@chrishamm said in Execonmcode + msmtp:

sudo bash -c 'echo "Subject: Scub\nImpression terminée" | msmtp scumdead@gmx.fr'

Thank you for your answers, but it’s not working.

Good morning,

I can’t get this command to work:
echo "Subject: Scub\nImpression terminée" | msmtp scumdead@gmx.fr

This works on the sbc, so msmtp is correctly installed.

Thank you for your help.

It works perfectly, thank you very much.
(Linux amd64 version)

Thanks for the answer, I’m testing this day, and tell you if it works.
Sorry for my poor english.

Ok, sorry.

Bonjour,

Je rencontre un problème avec reprap notify :
"Error parsing JSON: json: cannot unmarshal array into Go struct field .fanRPM of type int"
J'ai une duet 2 wifi en 1.04, et j'utilise RRF 3.2.1.

J'aimerais beaucoup pouvoir recevoir un email en fin d'impression...

Merci pour votre aide.