Hey,
I recently updated to firmware version 3.1 and I really like that the simulated print times are now displayed in webcontrol.
It would be cool if, after printing a file not simulated before, the actual printtime could be displayed as „simulated time“ in webcontrol.
@shirnschall After trying to get this to work for weeks, I found the error right after posting.
I used the old RRF 2
M106 F25000
to set the pwm frequency when it has changed to
M950 Q25000
in RRF 3.
The fans now work down to around 40% as expected.
@oliof I think I was using .6 or .7 with a long Bowden tube (as recommended on the duet PA website). I have since switched to a direct drive extruder (lgx ace), so this is really no longer an issue for me.
@phaedrux Thank you. Yes, I have looked at the documentation beforehand. I was unsure if I have to use the external 5V input on the duex if I am using the external 5V input on the duet itself.
To avoid confusion/errors I am now just using the external 5V on both the duex and the duet. Everything is working great.