Controversial posts made by tecno

@pertti

Then use models that work = simple as that. Ei muuta kun kokeilet mitkä toimivat.

@pertti

Try and you will know.

Looks like I have received a DOA board delivery

Just updated to DWC 3.4.1 and latest FW to the E3 board.

Homeing has been working but now all home*.g fails.

G91               ; relative positioning
G1 H2 Z5 F6000    ; lift Z relative to current position
G1 H1 X125 F1800 ; move quickly to X axis endstop and stop there (first pass)  ***STOPS HERE! NO pos update!***
G1 X-5 F6000       ; go back a few mm
G1 H1 X125 F360  ; move slowly to X axis endstop once more (second pass)
G1 H2 Z-5 F6000   ; lower Z again
G90               

@nightowl999 said in M950 output on 1XD:

That wasn't really clear from you post, though.

Lets blame the bloody foreigner