Best posts made by tecno

@fcwilt @jay_s_uk

IT WORKS NOW !!!

;Camera trigger
M950 P0 C"!io1.out" Q1

Thank you guys, this forum is so helpful !

I am building a big delta. Height 1400mm with Ø550mm printarea.

And now parts start emerging from suppliers/sponsors.

So stay tuned for more details.

Got my replacement board ( V1.2) and its is now up and running.

For future customers please deliver all new Toolboards with pre crimped pigtails for all connectors

Not everybody have or can afford to buy specialty crimp tooling as these miniature crimp connectors are PITA to crimp not having special tools.

Most users have proper crimp tool for next size up JST-XH and similar.

My two cents

https://youtu.be/JSg1X5fbeDI

Managed to make my first print yesterday evening by replacing nozzle to brass on Dragon. The suppied nozzle is not OK.

Good tool to have.

@jay_s_uk

Guess what, changed to Capricorn XS Series PTFE tube that is the reason that filamentis not sliding smoothly. Cranked up amps from 800mA to 1200mA and still same issue. So went back to normal PTFE tube and now it prints, No retract issues either what I can see.

No more Capricorn for me !!!

Can you point out pages easy to understand HOW to get from A to B to get input shaping do the magic.

Step by step for an old fart like me

Hi guys,
I was totally wrong as regards Capricorn.

The issue was a cooling fan for hotend not up to the task all the time giving me more grey hair!
Changed to and old CPU cooler fan and all my troubles went away.

So not enough cooling makes clogging and one blaims the tube = my bad !

New fans on the way, Noctua 40 5000rpm and Noctua 60mm, I can not stand the noise from this oldie Cooler Master CPU fan.

Sorry to be barking at the wrong tree.

Cheers
Bengt

@petr-k said in NPN sensor problem:

M558 P5 C"!zprobe.in" H5 F120 T6000

Try
M558 P5 C"^!zprobe.in" H5 F120 T6000

@peirof

Dry your PETG !!! It is hydrophobic

So at last the first test print is on its way = so far a happy camper here

@jay_s_uk

Got it all sorted out .................. phuu

How do I ge a backup of 0:/system ?

How to move firmware files to 0:/firmware ?

@dc42

OK one cable to one port it is then, thank you !

@fcwilt @Günter-Jibben @droftarts

Yes the carriages are a bit squeaky. Got the rails/carriages used (private sponsor) and I did Ultrasound clean the xross roller carriages and it would have been best to vacuum chamber oil the but as I don´t have one I have to use oil and try to soak the as good as I can.

Last parts printed for the mechanical upgrade on my Chiron, Y axis linear guides.

@phaedrux

@tecno said in Mini5 no terminal via USB:

@phaedrux said in Mini5 no terminal via USB:

I'd pull it from the case and disconnect everything and go through the what to do if it won't respond guide.

Did the reset button and yes I get files showing up in windows

A reset did the trick, so my Mini 5 is working again.

@phaedrux

Hmmm, how to I get this working? Where to install?

The bluish part is next in line as I have to wait for Y axis linear bearings to arrive from AliX in near future i hope.

Cheers from a bloody hot Sparreholm/Sweden
Bengt