Best posts made by theolodian

@dc42 Here they are

config (3).g
homeall (1).g

@jay_s_uk Thanks. This changes my whole approach to the API as well, so I will have to get up to speed on that in standalone mode.

Here is the uSD card in case anyone else wants to know. https://uk.rs-online.com/web/p/micro-sd-cards/1874667

@doctrucker OK, I may get corrected but: yes what you are doing will work if the parts are all in the same orientation. If you also need to rotate the print then you need to use coordinate system offsets instead, but otherwise it works in the same way that you are using tool offsets.

@danzaywer Could you wire the endstop to two inputs? I could see doing this on the 6HC, not sure about other boards.

SLC cards work great so far. Obviously it will probably be a long time before I can comment on how robust they might be, however it seems like cheap insurance if you want less worries about SD card failures.

I just used a Windows PC to copy the files from the visible (FAT32) partition of the old card to the already formatted new card.