Best posts made by TomasL

Well, since I am a brilliant engineer, I dont need to read any documentation, since everything is perfectly clear, well, not so.
I managed to put the ribbon vable in the wrong connectore, moving it from "LCD" to SD" solved the thing.

Well, the Lab
Right, what do I have in there, well:
One TEK 7854 computing mainframe with calculator.
One TEK 7603 with 7D20 Digitizer
One TEK 7613 Storage with Curve tracer
A number of various TEK7000 series Plug-Inns
One Nicolet 4094 Storage scope with dual 5 1/4 Floppy-Drive.
One TEK DPO7000
One HP 2GHz spectrum analyzer
One Agilent 6,5 digit DVM
One Fluke 8854a 5,5 Digit DVM
One fluke 8000 DVM
Various fluke handhelds
One handheld Agilent LCR-meter
One TEK 1241 96 channel Logic analyzer
One TEK 308 8-bit +16- bit Logic analyzer
One HP Counter
One TM500 with a number of various modules
3 weller WX soldering stations, 40, 80 and 200W
1 Weller De-solderiong station
One Hot air soldering station
2 Leica Stereo microscopes with lightassembly
One 3-d Printer
And to finilize the whole stuff, one complete SMD Pick and Place assembly line

Fredrick, I know, I need to get some more stuff.
On the purchace list is a Wow&Flutter meter amongst others.

Fredrick.
I am a HP-fan, I use an HP41 as my standard physical calculator.
I also have an HP97, that needs some restoration as well as an HP71B, together with HP-IL for the 71 and the 41 and an IL-printer.
When I get my Frankenstein -printer working, I have to print some spare parts for my Teletype model 33 ASR as well as for my Nakamichi 582 tape-deck, amongst others.
The Idea I have is to print hammer-rubbers in rubber-filiaments and to cast printer-heads for the Teletype (with lost-wax), since these currently is made of un-obtanium.

Anyway, Ill be back tomorrow, when I have done the tests on the end-stops.

It seems to be sorted, the view of extra heaters was selected, not the tool heaters.

@phaedrux Yes, I know all that, however my question was not answer in those documents.