Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. vapvap
    • Profile
    • Following 0
    • Followers 0
    • Topics 15
    • Posts 79
    • Best 6
    • Controversial 0
    • Groups 0

    vapvap

    @vapvap

    6
    Reputation
    1
    Profile views
    79
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    vapvap Unfollow Follow

    Best posts made by vapvap

    • RE: [SOLVED] Heated bed PID auto tune failed.

      @dc42 In the end, everything worked. Many, many thanks for your help.
      I did it Only because You shared your thoughts and experience with me.
      Without you, I would never have done it.
      In gratitude, let me share my experience with you.
      It is not enough, it can be useful ...
      With best regards.

      0_1537699118925_wallp_sm.jpg

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: [SOLVED] Heated bed PID auto tune failed.

      @adavidm I'm afraid that you are absolutely right. That's how I understood the instruction ...
      Sorry guys, I'm a total novice.
      I just needed an instruction for dummies.

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • Delta printer, bed size change (SOLVED)

      After bed replacing from 18cm to 22cm, printer start change the geometry of the objects in corners.
      Can you please tell me how to properly configure the firmware for new bed size?

      0_1555347803802_picture.png

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: Delta printer, bed size change (SOLVED)

      @bot WOW, mister, you are just a magician!
      It all worked!
      Thank you very much! 👍

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: Forward/redefine tools T0 & T1.

      Thank you so much, now everything works as it should!
      Honestly, the help and support of key figures like you makes this forum one of the best in 3D printing!
      Please stay with us! )

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: Z Probe shows 1000

      @Veti Thank you so much, now everything works! Five* )

      posted in Tuning and tweaking
      vapvapundefined
      vapvap

    Latest posts made by vapvap

    • RE: Orbiter 2 extruder mounting for Smart effector with Magball arms

      Can anyone explain how to set this up?
      With "Delta Calibration (G32)", the nozzle began to scratch on the center of the table ...

      posted in Smart effector for delta printers
      vapvapundefined
      vapvap
    • RE: Orbiter 2 extruder mounting for Smart effector with Magball arms

      @adrian52 Thank you so much for sharing your ideas with us.
      Do you do any additional fine-tuning in the firmware?

      posted in Smart effector for delta printers
      vapvapundefined
      vapvap
    • RE: Orbiter 2 extruder mounting for Smart effector with Magball arms

      @adrian52 As always, great idea!
      And as usual - we are waiting for the addition to "thingiverse".

      posted in Smart effector for delta printers
      vapvapundefined
      vapvap
    • RE: Orbiter 2 extruder mounting for Smart effector with Magball arms

      @adrian52 Thanks a lot.
      What plastic do you use/recommend for this part?

      posted in Smart effector for delta printers
      vapvapundefined
      vapvap
    • RE: Orbiter 2 extruder mounting for Smart effector with Magball arms

      @adrian52 Wow! Looks solid. Is this design available for download somewhere? Or is it an "alpha" version?

      posted in Smart effector for delta printers
      vapvapundefined
      vapvap
    • RE: "Lost" retract.

      @phaedrux

      It seems I understand what's going on.
      I have a remote extruder installed with a recommended acceleration value of 120. If this value is lowered a little, the retract starts working correctly. I also noticed that this happened when the retraction speed was above 30mm/s.
      The only thing I still don’t understand is why everything was without problems during the calibration tests?...

      posted in General Discussion
      vapvapundefined
      vapvap
    • "Lost" retract.

      After a break in printing, I found that the retract stopped working in the files generated by the slicers (during the retract, the short sound of a stalling motor). But if I generate the g-code from the site teachingtechyt.github.io, everything works fine.

      My CONFIG.G:

      ; Configuration file for Duet WiFi (firmware version 1.21)
      ; executed by the firmware on start-up
      ;
      ; generated by RepRapFirmware Configuration Tool on Mon Aug 06 2018 00:13:45 GMT+0100 (IST)
      
      ; General preferences
      G90                             ; Send absolute coordinates...
      M83                             ; ...but relative extruder moves
      M555 P1                         ; Set firmware compatibility to look like RepRapFirmare
      
      ;*** The homed height is deliberately set too high in the following - you will adjust it during calibration.
      M665 R105.6 L288 B105 H250       ; Set delta radius, diagonal rod length, printable radius and homed height
      M666 X0 Y0 Z0                   ; Put your endstop adjustments here, or let auto calibration find them
      
      ; Network
      M550 PMy printer                ; Set machine name
      M552 S1                         ; Enable network
      ;*** Access point is configured manually via M587
      M586 P0 S1                      ; Enable HTTP
      M586 P1 S0                      ; Disable FTP
      M586 P2 S0                      ; Disable Telnet
      
      ; Drives
      M569 P0 S0                      ; Drive 0 goes forwards
      M569 P1 S0                      ; Drive 1 goes forwards
      M569 P2 S0                      ; Drive 2 goes forwards
      M569 P3 S0                      ; Drive 3 goes forwards
      M350 X16 Y16 Z16 E16 I1         ; Configure microstepping with interpolation
      M92 X80 Y80 Z80 E2727           ; Set steps per mm
      M566 X370 Y370 Z1200 E40	   ; Set maximum instantaneous speed changes (mm/min)(Jerk)
      M203 X12000 Y12000 Z12000 E1200 ; Set maximum speeds (mm/min)
      M201 X3000 Y3000 Z1000 E120    ; Set accelerations (mm/s^2)
      M204 P4000 T2000 ;  Set accelerations for print and travel moves (mm/s^2)
      M906 X1000 Y1000 Z1000 E500 I30 ; Set motor currents (mA) and motor idle factor in per cent
      M84 S30                         ; Set idle timeout
      
      ; Axis Limits
      M208 Z0 S1                      ; Set minimum Z
      
      ; Endstops
      M574 X2 Y2 Z2 S1                ; Set active high endstops
      
      ; Z-Probe
      M558 P5 R0.4 H2 F1200 T6000     ; Set Z probe type to effector and the dive height + speeds
      G31 P100 X0 Y0 Z-0.1            ; Set Z probe trigger value, offset and trigger height
      M557 R90 S20                    ; Define mesh grid
      
      ; Heaters
      M307 H0 B0 S1.00                ; Disable bang-bang mode for the bed heater and set PWM limit
      
      M305 P0 T100000 B4138 C0 R4700  ; *Set thermistor + ADC parameters for heater 0
      M143 H0 S120                    ; *Set temperature limit for heater 0 to 120C
      M305 P1 B4725 C7.060000e-8      ; *Set thermistor + ADC parameters for heater 1
      M143 H1 S280                    ; *Set temperature limit for heater 1 to 280C
      
      
      ; Fans
      M106 P0 S0 I0 F25000 H-1          ; Set fan 0 value, PWM signal inversion and frequency. Thermostatic control is turned off
      M106 P1 S1 I0 F500 H1 T45       ; Set fan 1 value, PWM signal inversion and frequency. Thermostatic control is turned on
      M106 P2 S0 I0 F500 H-1          ; Set fan 2 value, PWM signal inversion and frequency. Thermostatic control is turned on
      
      ; Tools
      M563 P0 D0 H1 F2                  ; Define tool 0 + DEFAULT Fan0 ->forwarded to-> Fan2!!!
      G10 P0 X0 Y0 Z0                 ; Set tool 0 axis offsets
      G10 P0 R0 S0                    ; Set initial tool 0 active and standby temperatures to 0C
      
      ; Automatic saving after power loss is not enabled
      
      ; Custom settings are not configured
      
      ; Miscellaneous
      T0                              ; Select first tool
      M501				; new commands override the ones earlier in your config.g
      

      G-code from teachingtechyt.github.io:

      retraction.gcode

      G-code from PrusaSlicer:

      Mask_hook.gcode

      Tell me please, what should I do to make the retract work in the slicer?

      posted in General Discussion
      vapvapundefined
      vapvap
    • Pressure Advance issue

      Please tell me why the beginning of the lines is printed with a strong narrowing? What does this mean and how can I fix it?

      photo_2021-01-19_22-37-17.jpg

      Duet3D WiFi (Delta)
      RepRapFirmware for Duet 2 WiFi/Ethernet 2.05.1 (2020-02-09b1)
      Flex3Drive G5 (Extruder)

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: Retract problem (Flex3Drive)

      @arhi Wow!
      Could you share more information about your wonderful motor? ☺

      posted in Tuning and tweaking
      vapvapundefined
      vapvap
    • RE: Retract problem (Flex3Drive)

      @dc42 Thanks for your advice, but in your opinion, how much (mm/s or may be "steps") can acceleration be reduced?

      posted in Tuning and tweaking
      vapvapundefined
      vapvap