@dc42 said in 3.0RC1+DSF 1.2 on Duet3+RPI3 - Immediately reboots on Job Start:

@Luke-sLaboratory said in 3.0RC1+DSF 1.2 on Duet3+RPI3 - Immediately reboots on Job Start:

@dc42 Thank you for Fixing it so quickly!

You reported it at just the right time. But I am surprised that nobody else reported the same issue.

Yeah I did a search and was very surprised to not see another - I'm barely getting my new machine up and running so I figured others would be breaking things.

Confirmed Fixed.

@fotomas said in Homing issue with 2.05 on Duet 0.85:

G29 S1 ; Load stored mesh grid from SD Card

Not a good idea to load the mesh at power on before the Z axis has been probe. Load it at the end of homeall or in your slicer start gcode.

@jannau Thank you ! I will think about everything you said, and give several things a try.

Thank you!

@Garfield said in Build Environment:

Nope - no desire to maintain any 'fork' - just for understanding -

Then setting up a build is many hours that don't really gain anything. Just browse Github, and/or download a zip and unzip and use your favorite text/search thingie.

Ah, thank you! It was on the virtual SD, but I thought it was an old copy (that I'd somehow touched the timestamp).

Anyway, thank you and Merry Christmas!

You guys Rock! I guess I had too many late nights and missed such a simple change. I now realize the Y endstop is indeed at the rear left of the machine as looked at from above, but... It's Positive and that's what I missed in the endstop configuration as you all have pointed out. I changed the Y1 to Y2 and lo and behold.. It works! Thanks to each of you for taking the time to dig through my config.g file and finding this!! Bless you all and merry christmas!!!

Kelly

When clearing probe 0 and then assigning my second probe to K0 it works, but that can only be a workaround so far.

Got both my cartesian (Maestro) and delta(Duet Ethernet) running on 3.0RC1 with no issues other than those that were self inflicted. I don't have any specific printing requirements right now so I've just been printing calibration stuff and Benchys but all is working well. Thanks guys for all the work.

Well, I can't reproduce the issue with the heightmap not being applied relative to jerk (with me being the jerk 🙂 ).

Still have the issues with the heightmap not being applied on homing and with baby steps being applied to the Z position display.

@dc42 said in RRF 3.0RC1 Z Homing Issue (Analogue Mode):

I think I have found the reason for the problem, although I don't have a printer using an analog probe at present so I can't test the fix. Please try the Duet2CombinedFirmware.bin file at https://www.dropbox.com/sh/3azy1njy3ayjsbp/AACquxr2m00eV568RZg5QG5wa?dl=0.

Yes, that has solved the problem. Many thanks and a Merry Christmas 🎅 😃

M25 during tool change works now, thank you.

It was an issue in RRF code that is only used when communicating with the SBC. Will be fixed in RRF3.0RC2.

thanks, I have not encountered any other missing parameter.

@Phaedrux I guess so, I just haven't tried it (macro's) yet, so time to get on with that too 😄

chrishamm replied via DSF issue board confirming that M26 is buggy and will be fixed in next release.