BondTech CR-10S Extrusion Problem

deckingman

@Kaizer Literally, it's just "TO" on a new line (without the quotes). So:

G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
T0

or put the T0 first if you need to heat the hot end before homing.

Kaizer

@deckingman Thanks alot. will give it a try now.

Veti

E3D V6

if its a genuine E3D the settings are: B4725 C7.060000e-8

Kaizer

@Veti Thanks, so its gonna be

M305 P1 T100000 B4725 C7.060000e-8 ; set thermistor + ADC parameters for heater 1

?

Veti

correct. the r parameter is not required as will be replaced by the correct one for your board.

Kaizer

@Veti what do u mean by r parameter? sorry i dont really understand programming language.

Veti

M305 P0 T100000 B4138 R4700 ; set thermistor + ADC parameters for heater 0

R4700. That is optional and not required as its the default value.

Kaizer

@Veti i see, Thanks a lot.

Kaizer

@deckingman Thanks for the help. it works fine now.

deckingman

@Kaizer Glad you are sorted.