SSR stuck on???

[whosrdaddy]

@gnydick : If I look at your photo, I believe you made a wiring error, you have wires labeled "BED-SSR" connected to the VIN connector and wired VIN to the Bed output connector!!!! Please double check your wiring, diagrams can be found here

[dc42]

@whosrdaddy said in SSR stuck on???:

@gnydick : If I look at your photo, I believe you made a wiring error, you have wires labeled "BED-SSR" connected to the VIN connecter an wired VIN to the Bed output connector!!!! Please double check your wiring, diagrams can be found here

Well spotted!

[whosrdaddy]

I stared like 10 minutes at his photo and didn't see the error, thanks to @jens55's remark, it all made sense

[Phaedrux]

Completely glossed over that one. Should have looked at the diagram.

[Phaedrux]

But my test asked to disconnect the bed wiring and test the terminals without an SD card present. Was that not actually carried out?

[gnydick]

@whosrdaddy yep, that was it! Thank you!

[gnydick]

@Phaedrux I didn't, I just disconnected the SSR and used the wires

[Phaedrux]

I guess then with vin being fed into the bed terminals it was also present on the actual win terminals. Of course.

[whosrdaddy]

@gnydick: No problem, I hope you didn't damage your board

@Phaedrux: yes indeed, it all makes sense now

[A Former User]

@gnydick said in SSR stuck on???:

@Phaedrux I didn't, I just disconnected the SSR and used the wires

Sometimes I wonder why you even bother asking for help here, you clearly think you know better than all of us.

[elmoret]

First post: “it’s all wired correctly”

Humble pie!

[gnydick]

@elmoret I'll be the first to admit when I'm wrong. I didn't insist or argue that it was correct or protest against sending photos. So what's your point?

[gnydick]

@bearer wow. People make mistakes. At what point did I argue, disagree, or try to defend my mistakes in this post?

I know exactly what you're referring to. Solution is easy enough, just don't interact with me. In fact, I can make that happen for you.