Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    nozzle wipe

    Scheduled Pinned Locked Moved
    3D Printing General Chat
    14
    83
    6.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mwolterundefined
      mwolter
      last edited by mwolter

      Simplified the conditional script a little with the use of mod (thanks @dc42) and added comments. Might help those interested in learning conditional gcode.

      Overview: The code below moves the nozzle to the right and left of the nozzle wiper blade. Each move also moves the nozzle forward 2mm. Mod is short for modulus and returns the remainder. For instance, mod(10,4) returns 5. 10 / 4 = 2.5 or .5

      G1 X-12 Y332 F24000                                     ; rapid to inital point outside the wipe strip
      while true                                              ; continually run everything within this while loop
      	if mod(iterations,2) = 0                        ; if iterations is an even number
      		G1 X-4 Y{332 - iterations * 2} F1200    ; move to right side of wiper and forward 2 * iterations 
      	else                                            ; if the if condition above is not met
      		G1 X-12 Y{332 - iterations * 2}         ; move to left side of wiper and forward 2 * iterations 
      	if iterations = 6                               ; if this is the seventh time running the while loop (0 is always the first iteration)
      		break                                   ; exit the while loop  
      
      1 Reply Last reply Reply Quote 1
      • deckingmanundefined
        deckingman
        last edited by

        For completeness, here is my non-conditional gcode nozzle wipe macro........

        G90; set to absolute coordinates
        G1 X50 Y363 F12000; move quickly to rear left
        G1 X80 Y352 F900; slowly right 30, forward 11
        G1 X110 Y363; slowly right another 30 and back 11
        G1 X140 Y352; slowly right another 30 and forward 11
        G1 X170 Y363; back and right

        Ian
        https://somei3deas.wordpress.com/
        https://www.youtube.com/@deckingman

        arhiundefined 1 Reply Last reply Reply Quote 1
        • arhiundefined
          arhi
          last edited by

          Looking at the video how efficient @deckingman cleanup is I think we'r moving nozzle over the silicone this many times just 'cause it's easy in the loop and not 'cause it's needed :D. It's fun for sure.

          1 Reply Last reply Reply Quote 1
          • arhiundefined
            arhi @deckingman
            last edited by

            @deckingman question, does these look like your stripe?

            https://www.aliexpress.com/item/10000000975575.html
            https://www.aliexpress.com/item/32953108608.html
            https://www.aliexpress.com/item/32947574656.html

            They are silicone stripe in different dimensions but "high temperature resistant silicone rubber foam sealing strips". The "foam" part is weird never seen silicone foam. Will this maybe be too soft? Looking at your video, your stripe seem to be rather hard

            deckingmanundefined 2 Replies Last reply Reply Quote 0
            • deckingmanundefined
              deckingman @arhi
              last edited by deckingman

              @arhi That stuff looks a bit spongy. Definitely not like the stuff I used.

              EdIt ....but it might work - dunno.

              Ian
              https://somei3deas.wordpress.com/
              https://www.youtube.com/@deckingman

              1 Reply Last reply Reply Quote 1
              • deckingmanundefined
                deckingman @arhi
                last edited by deckingman

                @arhi I can't be sure but the stuff I used was more like this https://www.ebay.co.uk/itm/SOLID-SILICONE-RUBBER-STRIPS-3MMTHK-X-5MTRS-LONG-WHITE-60-SHORE-FDA-GRADE/331230136018?hash=item4d1edac6d2ⓂmM0icdmB-aIKG93gQRG6wvw. The listing is for 3mm thick (which is what I think I used), but the picture looks like 1mm thick. But it's definitely "solid".

                Ian
                https://somei3deas.wordpress.com/
                https://www.youtube.com/@deckingman

                deckingmanundefined 1 Reply Last reply Reply Quote 1
                • deckingmanundefined
                  deckingman @deckingman
                  last edited by

                  This is what I have. The picture is a bit out of focus but it's solid and about 3mm x 10mm.

                  S2190002.JPG

                  Ian
                  https://somei3deas.wordpress.com/
                  https://www.youtube.com/@deckingman

                  1 Reply Last reply Reply Quote 1
                  • arhiundefined
                    arhi
                    last edited by

                    @deckingman thanks, I was afraid of that "sponge" part too .. both looks spongy and title say sponge 😄 .. from what I see it is insulation strip so it's expected to be pressed between something I think...

                    deckingmanundefined 1 Reply Last reply Reply Quote 0
                    • deckingmanundefined
                      deckingman @arhi
                      last edited by

                      @arhi It might still work. Or to put it another way, I do know the solid stuff works, the spongy stuff might work but I don't know for sure if it will.

                      Ian
                      https://somei3deas.wordpress.com/
                      https://www.youtube.com/@deckingman

                      1 Reply Last reply Reply Quote 0
                      • mwolterundefined
                        mwolter
                        last edited by

                        Here's what I've been using with success. Tested the silicone blade and 250c nozzle temps didn't affect it. Also tried a soldering iron at 350c and it couldn't touch it. Should be safe with the temperatures I plan to use for ABS, PC and Nylon.

                        Screen Shot 2020-04-30 at 7.30.30 AM.jpg
                        Link to Product
                        https://www.amazon.com/gp/product/B000BQU0CQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

                        IMG_3050.jpeg

                        The blade itself is about 2.2mm wide, has a flat edge on one side and a round key on the other. Total height is about 20mm and it's 200mm long. Enough to do several printers.

                        Screen Shot 2020-04-30 at 7.28.08 AM.jpg
                        The blade is easily mounted and prevented from sliding out by a wall on the opposite side. Macro starts on the side closest to the camera and zig-zags away.

                        1 Reply Last reply Reply Quote 1
                        • arhiundefined
                          arhi
                          last edited by arhi

                          I tried one blade and it didn't hold up on 200C 😞
                          I ordered some of that spongy things + I found solid one too so ordered that too we'll see when/if arrives... found something super cool now amongst baby things need to test for temp might be a win ... another kitchen utencil, found between baby things ... temp. resistent 😄

                          7a623c76-40e2-470d-9627-81e09fa07b6a-image.png

                          zaptaundefined 1 Reply Last reply Reply Quote 0
                          • zaptaundefined
                            zapta @arhi
                            last edited by

                            @arhi said in nozzle wipe:

                            I tried one blade and it didn't hold up on 200C

                            This one should sustain high temperature. It is used to hold hot solder iron tips.

                            https://www.tequipment.net/Metcal/AC-CP2/Soldering-Accessories/?Source=googleshopping

                            The one I have is 2.3mm in thickness and the square portion is 75mm x 75. It's a rubbery thing.

                            arhiundefined 1 Reply Last reply Reply Quote 0
                            • arhiundefined
                              arhi @zapta
                              last edited by

                              @zapta ha, I have exactly the same thing that I got with my PACE ages ago, you are supposed to use it to grab your hot tip to replace with another one 😄 but it's very soft, it's like the stuff I already have in the wiper right now. This "cup" will work great till I get the long strips, it is much stiffer, and when long strips arrive cup will be cool to hold the bits of plastic 😄

                              1 Reply Last reply Reply Quote 0
                              • Nuramoriundefined
                                Nuramori
                                last edited by

                                One thing I did was collect all the old and torn silicone socks I had lying around and made a wipe. B97DC44A-85D2-417D-94F8-8FA5677E1E6A.jpeg

                                I just sliced off the sides and kept the face, then alternated them with washers. Used RTV on the bottom to bind them.

                                zaptaundefined 1 Reply Last reply Reply Quote 3
                                • zaptaundefined
                                  zapta @Nuramori
                                  last edited by

                                  Stumbled upon this one while searching for a silicon work mat.

                                  E.g. the 50x50x20mm.

                                  https://www.aliexpress.com/item/4000765138240.html

                                  1 Reply Last reply Reply Quote 1
                                  • zaptaundefined
                                    zapta
                                    last edited by zapta

                                    The last 3D Printing Today (episode #349) discussed some magic 'inexpensive silicon foam' that works great to wipe the nozzle.

                                    It starts at the 17 minutes mark. (Clicon on the POD icon to start playing, or find them on your favorite podcast player).

                                    https://threedprintingtoday.libsyn.com/3d-printing-today-349

                                    I think they were referring to something like this: https://www.amazon.com/Silicone-T-Shirt-Machine-Transfer-Cushion/dp/B07HNSWXDQ

                                    1 Reply Last reply Reply Quote 1
                                    • First post
                                      Last post
                                    Unless otherwise noted, all forum content is licensed under CC-BY-SA