• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Release 3.01-RC10

Scheduled Pinned Locked Moved Unsolved
General Discussion
7
62
2.6k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Leblond
    last edited by 1 May 2020, 15:07

    @dc42 I confirm that with version 3 of the fw I have this problem, but with the version of FW 2.05 everything works great, so I will continue to use FW 2.05, until you can understand where the problem lies

    1 Reply Last reply Reply Quote 0
    • undefined
      Leblond
      last edited by 4 May 2020, 14:16

      Hi everyone, have you discovered anything about my problem?

      1 Reply Last reply Reply Quote 0
      • undefined
        Leblond
        last edited by 6 May 2020, 13:38

        good morning guys
        I have found that by sending the axes home manually one at a time starting with x, y and z, the extruder works

        1 Reply Last reply Reply Quote 0
        • undefined
          Leblond
          last edited by 6 May 2020, 13:41

          but as soon as a g28 is made it no longer works and the extruder stalls

          undefined 1 Reply Last reply 6 May 2020, 15:45 Reply Quote 0
          • undefined
            Leblond
            last edited by 6 May 2020, 13:42

            I also installed Release 3.01-RC12 ma niet

            1 Reply Last reply Reply Quote 0
            • undefined
              Leblond
              last edited by 6 May 2020, 13:54

              for @dc42 no idea?

              1 Reply Last reply Reply Quote 0
              • undefined
                Leblond
                last edited by 6 May 2020, 15:37

                Guys forgive me if I insist, but it seems strange to me that only I have a problem with a brand new card and you can't find a solution

                1 Reply Last reply Reply Quote 0
                • undefined
                  sebkritikel @Leblond
                  last edited by sebkritikel 5 Jun 2020, 15:46 6 May 2020, 15:45

                  @Leblond said in Release 3.01-RC10:

                  but as soon as a g28 is made it no longer works and the extruder stalls

                  When you send "G28" or "G28 Z" ?

                  Can you post homeall.g?

                  @Leblond said in Release 3.01-RC10:

                  good morning guys
                  I have found that by sending the axes home manually one at a time starting with x, y and z, the extruder works

                  G28 X
                  Extruder Works
                  G28 Y
                  Extruder Works
                  G28 Z
                  Extruder Works

                  G28
                  Does not work?

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    Leblond
                    last edited by 6 May 2020, 15:52

                    it is exact only when sending g28 the extruder stalls

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Leblond
                      last edited by 6 May 2020, 15:53

                      ; homeall.g
                      ; called to home all axes
                      ;
                      ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 23 2020 22:39:29 GMT+0200 (Ora legale dell’Europa centrale)
                      G91 ; relative positioning
                      G1 H2 Z5 F6000 ; lift Z relative to current position
                      M913 X50 Y50 ; Riduci la corrente al 50%
                      G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass)
                      G1 H1 X-9999 ; home X axis
                      G1 H1 Y-9999 ; home Y axis
                      G1 X5 Y5 F2000 ; go back a few mm
                      G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass)
                      G1 H1 Y-9999 ; then move slowly to Y axis endstop
                      G90 ; absolute positioning
                      G1 X60 Y50 F9000 ; go to first bed probe point and home Z
                      M913 X100 Y100 :Riporta la corrente al 100%
                      G30 ; home Z by probing the bed

                      ; Uncomment the following lines to lift Z after probing
                      ;G91 ; relative positioning
                      ;G1 Z10 F100 ; lift Z relative to current position
                      ;G90 ; absolute positioning

                      undefined 1 Reply Last reply 6 May 2020, 16:05 Reply Quote 0
                      • undefined
                        sebkritikel @Leblond
                        last edited by sebkritikel 5 Jun 2020, 16:05 6 May 2020, 16:05

                        @Leblond said in Release 3.01-RC10:

                        ; homeall.g
                        ; called to home all axes
                        ;
                        ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Apr 23 2020 22:39:29 GMT+0200 (Ora legale dell’Europa centrale)
                        G91 ; relative positioning
                        G1 H2 Z5 F6000 ; lift Z relative to current position
                        M913 X50 Y50 ; Riduci la corrente al 50%
                        G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass)
                        G1 H1 X-9999 ; home X axis
                        G1 H1 Y-9999 ; home Y axis
                        G1 X5 Y5 F2000 ; go back a few mm
                        G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass)
                        G1 H1 Y-9999 ; then move slowly to Y axis endstop
                        G90 ; absolute positioning
                        G1 X60 Y50 F9000 ; go to first bed probe point and home Z
                        M913 X100 Y100 :Riporta la corrente al 100%
                        G30 ; home Z by probing the bed

                        ; Uncomment the following lines to lift Z after probing
                        ;G91 ; relative positioning
                        ;G1 Z10 F100 ; lift Z relative to current position
                        ;G90 ; absolute positioning

                        Can you try:

                        ;homeall.g
                        G91 ; relative positioning
                        G1 H2 Z5 F6000 ; lift Z relative to current position
                        ;;;M913 X50 Y50 ; Riduci la corrente al 50%
                        G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass)
                        G1 X5 Y5 F2000 ; go back a few mm
                        G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass)
                        G1 H1 Y-9999 F360 ; then move slowly to Y axis endstop
                        G90 ; absolute positioning
                        G1 X60 Y50 F9000 ; go to first bed probe point and home Z
                        ;;;M913 X100 Y100 :Riporta la corrente al 100%
                        G30 ; home Z by probing the bed
                        undefined 2 Replies Last reply 6 May 2020, 16:06 Reply Quote 0
                        • undefined
                          Leblond @sebkritikel
                          last edited by 6 May 2020, 16:06

                          @sebkritikel ok now i try

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            Leblond @sebkritikel
                            last edited by 6 May 2020, 16:14

                            @sebkritikel said in Release 3.01-RC10:

                            ;homeall.g G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position ;;;M913 X50 Y50 ; Riduci la corrente al 50% G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass) G1 X5 Y5 F2000 ; go back a few mm G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass) G1 H1 Y-9999 F360 ; then move slowly to Y axis endstop G90 ; absolute positioning G1 X60 Y50 F9000 ; go to first bed probe point and home Z ;;;M913 X100 Y100 :Riporta la corrente al 100% G30 ; home Z by probing the bed
                            91/5000

                            wait because it gives me an error "6/5/2020, 18:12:41 G28
                            Error: G0 / G1: insufficient axes homed "

                            undefined 2 Replies Last reply 6 May 2020, 16:18 Reply Quote 0
                            • undefined
                              sebkritikel @Leblond
                              last edited by 6 May 2020, 16:18

                              This post is deleted!
                              1 Reply Last reply Reply Quote 0
                              • undefined
                                sebkritikel @Leblond
                                last edited by sebkritikel 5 Jun 2020, 16:25 6 May 2020, 16:25

                                @Leblond said in Release 3.01-RC10:

                                @sebkritikel said in Release 3.01-RC10:

                                ;homeall.g G91 ; relative positioning G1 H2 Z5 F6000 ; lift Z relative to current position ;;;M913 X50 Y50 ; Riduci la corrente al 50% G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass) G1 X5 Y5 F2000 ; go back a few mm G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass) G1 H1 Y-9999 F360 ; then move slowly to Y axis endstop G90 ; absolute positioning G1 X60 Y50 F9000 ; go to first bed probe point and home Z ;;;M913 X100 Y100 :Riporta la corrente al 100% G30 ; home Z by probing the bed
                                91/5000

                                wait because it gives me an error "6/5/2020, 18:12:41 G28
                                Error: G0 / G1: insufficient axes homed "

                                Ok maybe my mistake. Please try:

                                ;homeall.g
                                G91 ; relative positioning
                                G1 H2 Z5 F6000 ; lift Z relative to current position
                                ;;;M913 X50 Y50 ; Riduci la corrente al 50%
                                G1 H1 X-9999 Y-9999 F4000 ; move quickly to X or Y endstop and stop there (first pass)
                                G1 H1 X-9999 ; home X axis
                                G1 H1 Y-9999 ; home Y axis
                                G1 X5 Y5 F2000 ; go back a few mm
                                G1 H1 X-9999 F360 ; move slowly to X axis endstop once more (second pass)
                                G1 H1 Y-9999 F360; then move slowly to Y axis endstop
                                G90 ; absolute positioning
                                G1 X60 Y50 F9000 ; go to first bed probe point and home Z
                                ;;;M913 X100 Y100 :Riporta la corrente al 100%
                                G30 ; home Z by probing the bed
                                undefined 2 Replies Last reply 6 May 2020, 16:25 Reply Quote 0
                                • undefined
                                  Leblond @sebkritikel
                                  last edited by 6 May 2020, 16:25

                                  This post is deleted!
                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    Leblond @sebkritikel
                                    last edited by 6 May 2020, 16:26

                                    @sebkritikel there was a small error, so it works:

                                    ; homeall.g
                                    G91; relative positioning
                                    G1 H2 Z5 F6000; lift Z relative to current position
                                    ; M913 X50 Y50; Reduce the current to 50%
                                    G1 H1 X-9999 F4000
                                    G1 H1 Y-9999; move quickly to X or Y endstop and stop there (first pass)
                                    G1 X5 Y5 F2000; go back a few mm
                                    G1 H1 X-9999 F360
                                    G1 H1 Y-9999; move slowly to X axis endstop once more (second pass)
                                    G90; absolute positioning
                                    G1 X60 Y50 F9000; go to first bed probe point and home Z
                                    ; M913 X100 Y100: Returns the current to 100%
                                    G30; home Z by probing the bed

                                    Change something for you?

                                    undefined 1 Reply Last reply 6 May 2020, 16:28 Reply Quote 0
                                    • undefined
                                      Leblond
                                      last edited by 6 May 2020, 16:27

                                      by the test I mean

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        sebkritikel @Leblond
                                        last edited by 6 May 2020, 16:28

                                        @Leblond said in Release 3.01-RC10:

                                        @sebkritikel there was a small error, so it works:

                                        ; homeall.g
                                        G91; relative positioning
                                        G1 H2 Z5 F6000; lift Z relative to current position
                                        ; M913 X50 Y50; Reduce the current to 50%
                                        G1 H1 X-9999 F4000
                                        G1 H1 Y-9999; move quickly to X or Y endstop and stop there (first pass)
                                        G1 X5 Y5 F2000; go back a few mm
                                        G1 H1 X-9999 F360
                                        G1 H1 Y-9999; move slowly to X axis endstop once more (second pass)
                                        G90; absolute positioning
                                        G1 X60 Y50 F9000; go to first bed probe point and home Z
                                        ; M913 X100 Y100: Returns the current to 100%
                                        G30; home Z by probing the bed

                                        Change something for you?

                                        I think I made a mistake. I am not a CoreXY expert 🤠 Sorry!

                                        So does:

                                        ; homeall.g
                                        G91; relative positioning
                                        G1 H2 Z5 F6000; lift Z relative to current position
                                        ; M913 X50 Y50; Reduce the current to 50%
                                        G1 H1 X-9999 F4000
                                        G1 H1 Y-9999; move quickly to X or Y endstop and stop there (first pass)
                                        G1 X5 Y5 F2000; go back a few mm
                                        G1 H1 X-9999 F360
                                        G1 H1 Y-9999; move slowly to X axis endstop once more (second pass)
                                        G90; absolute positioning
                                        G1 X60 Y50 F9000; go to first bed probe point and home Z
                                        ; M913 X100 Y100: Returns the current to 100%
                                        G30; home Z by probing the bed

                                        Work ok?

                                        undefined 2 Replies Last reply 6 May 2020, 16:29 Reply Quote 0
                                        • undefined
                                          Leblond @sebkritikel
                                          last edited by 6 May 2020, 16:29

                                          @sebkritikel quello che ho corretto io funziona bene
                                          ho provato e l'estrusore funziona bene

                                          1 Reply Last reply Reply Quote 1
                                          36 out of 62
                                          • First post
                                            36/62
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA