Need help installing ustreamer

luckyflyer

I tried

sudo apt-get install libevent-dev libevent-pthreads-2.1-8 libjpeg8-dev uuid-dev libbsd-dev

and got the same error.

jay_s_uk

have you tried without specifying a version?

luckyflyer

Tried,

sudo apt-get install libevent libevent-pthreads libjpeg8-dev uuid-dev libbsd-dev

got the same error.

gtj0

@luckyflyer You don't have to specify libevent-pthreads. It's automatically installed when you install libevent

Also have you run an apt-get update lately?

luckyflyer

@gtj0

Yes, pi software install was new this morning with these on a stand alone pi3B+,

sudo apt-get update
sudo apt-get upgrade
sudo reboot

I want to get it right on the standalone pi before I try it on the Duet pi. I'll try just libevent.

luckyflyer

@gtj0

I ran this,

sudo apt-get install libevent libjpeg8-dev uuid-dev libbsd-dev

and got this,

pi@raspberrypi:~ $ sudo apt-get install libevent libjpeg8-dev uuid-dev libbsd-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libevent

I'm running the full desktop version of raspbian buster.

A Former User

if you're building something you probaby need sudo apt install libevent-dev ?

also could you be running into ipv6 issues, every now and then my pi or debian systems insist on using ipv6 mirrors but it usually looks different. long shot, but might help someone else stumbling onto the thread https://www.vultr.com/docs/force-apt-get-to-ipv4-or-ipv6-on-ubuntu-or-debian

luckyflyer

@bearer
That worked and is now installed.

A Former User

@luckyflyer said in Need help installing ustreamer:

That worked

which one? >D

luckyflyer

@bearer

sudo apt install libevent-dev

A Former User

confused; thats what you started with after having not just skimmed the thread. gtj0 was right then

luckyflyer

No one is more confused than I am, lol.
I think the difference is I tried this complete line

sudo apt-get install libevent libjpeg8-dev uuid-dev libbsd-dev

I did not specify -dev and also yours did not have this at the end

libjpeg8-dev uuid-dev libbsd-dev

Man I appreciate the fact that linux is compact and efficient. But it's a real challenge to figure it out. Its very unforgiving.

luckyflyer

So my question now is have I left anything incomplete by not having this bit of code included

libjpeg8-dev uuid-dev libbsd-dev

A Former User

just add them with sudo apt install libjpeg8-dev uuid-dev libbsd-dev if you don't worst thing that happens is that make fails

luckyflyer

I ran

sudo apt-get install libjpeg8-dev uuid-dev libbsd-dev

and got this,

The following NEW packages will be installed:
  libbsd-dev libjpeg8 libjpeg8-dev

Finally I think I'm getting there.

luckyflyer

Succuss, Got ustreamer to compile.

luckyflyer

I've got ustreamer compiled and it is supposed to default broadcast on http://127.0.0.1:8080
I get,
This site can’t be reached 127.0.0.1 refused to connect.
This is on chrome and edge doesn't connect either. I have temporarily disabled the firewall but still no connect.
When I try a different ip address with the start script for example 192.168.0.116:8080 I get

ERROR [127.103 main] -- Can't bind HTTP on [192.168.0.116]:80: Cannot assign requested address
I've tried other address's also with the same result.

Ustreamer doesn't show anything wrong on http://127.0.0.1:8080
below is its startup.

pi@raspberrypi:~/ustreamer $ ./ustreamer
-- INFO [2804.103 main] -- Installing SIGINT handler ...
-- INFO [2804.103 main] -- Installing SIGTERM handler ...
-- INFO [2804.103 main] -- Ignoring SIGPIPE ...
-- INFO [2804.104 main] -- Using internal blank placeholder
-- INFO [2804.104 main] -- Listening HTTP on [127.0.0.1]:8080
-- INFO [2804.105 stream] -- Using V4L2 device: /dev/video0
-- INFO [2804.105 stream] -- Using desired FPS: 0
-- INFO [2804.105 http] -- Starting HTTP eventloop ...
-- INFO [2804.190 stream] -- Device fd=8 opened
-- INFO [2804.191 stream] -- Using input channel: 0
-- INFO [2804.191 stream] -- Using TV standard: DEFAULT
-- INFO [2804.193 stream] -- Using resolution: 640x480
-- INFO [2804.193 stream] -- Using pixelformat: YUYV
-- INFO [2804.195 stream] -- Using HW FPS: 0 -> 15 (coerced)
-- INFO [2804.198 stream] -- Requested 5 HW buffers, got 5
-- INFO [2804.202 stream] -- Capturing started
-- INFO [2804.202 stream] -- Using JPEG quality: 80%
-- INFO [2804.202 stream] -- Creating pool with 4 workers ...
-- INFO [2804.202 stream] -- Capturing ...

Help please.

A Former User

@luckyflyer said in Need help installing ustreamer:

This site can’t be reached 127.0.0.1 refused to connect.

only works on the pi, not from any other computer/device.

@luckyflyer said in Need help installing ustreamer:

ERROR [127.103 main] -- Can't bind HTTP on [192.168.0.116]:80: Cannot assign requested address

dwc is probably already using port 80 so (for unknowna and unrealated reasons the script) is ignoring your :8080 somehow, should probably specify it as --host=0.0.0.0 --port=8080 to bind to all available ip addresses and port 8080?

gtj0

Here's the command line I use...

/usr/local/bin/ustreamer -r 640x480 --static /tmp/ -m JPEG -d /dev/video0 --host=0.0.0.0 --port=8080

luckyflyer

I tried chrome that's on pi (this is a standalone pi not the Duet pi) @ http://0.0.0.0:8080 and ustreamer works perfectly both snapshots and stream look good.
I just need to figure out why I can't get to that address with my pc.