D-Bot/CrusaXY mash up (CoreXY iDEX)

Veti

a duet 3 toolboard would be a good fit for that setup i think

Rushmere3D

@Veti

It would but for the cost of the PCB's and connectors this is far far cheaper and simpler to setup.

I'm thinking about adding an extra stepper motor for dual Z motor control, that would be via a duet expansion board.

Veti

@Rushmere3D said in D-Bot/CrusaXY mash up (CoreXY iDEX):

I'm thinking about adding an extra stepper motor for dual Z motor control, that would be via a duet expansion board.

thats twice the price of a Duet 3 Toolboard 1LC (which contains 1 stepper driver)

Rushmere3D

@Veti

I can use a Tool board for a Z stepper driver?

Veti

@Rushmere3D
you could, but it makes more sense to drive the stepper motor on the extruder with it and free up the driver on the duet 3 board for the second z

Rushmere3D

@Veti

Oh right I see now, yeah that's a good idea. Thanks I'll consider it.

Veti

it has the same mounting option as your board.
https://www.duet3d.com/Duet3Toolboard1LC

and you only need 4 wires.
2 wires for data and 2 for power.

Phaedrux

Good to see a dbot get some love.

Rushmere3D

First few prints off the printer.

matt3o

great work. you guys are all better than me at producing great printers

Rushmere3D

Hey all,

Thought I'd post some more pictures of the extruder setup I'm currently using, just to have a complete record on this thread.

First up in the PINDA probe mount
alt text

And here the magnetic extruder mounts
alt text

And a better view of the extruder board, this is the second tool, so the bed leveling headers aren't soldered in
alt text

T3P3Tony

Nice work @Rushmere3D I will move this post to the "may duet controlled machine" category so its easier to find for people wanting to do something similar.

Rushmere3D

@T3P3Tony

Thank you, it wasn't until after I made the thread I realised there was a better category but couldn't change it myself?

Rushmere3D

Hi all,

So I'm finally getting around to adding the second extruder to my iDEX printer and I was wondering if someone knowledgeable would be kind enough to take a look at my config I've made? I'm waiting on a few connectors and tool so the printer isn't currently moving so I've take a guess on some of the offsets but some advice with that would also be appreciated but it's more the setup and naming of things I'm unsure of.

Edit to remove config files, as I'm making changes to my config. Will request help again soon

Thanks in advance, James.

Rushmere3D

Quick question, am I right in thinking if I want to run two Toolboards on a duet3 I also need a Distribution Board?

Thanks,

J.

Rushmere3D

Another question while I think of it. Can you modify macros on the paneldue?

Rushmere3D

Anyone able to answer my two questions?

Thanks.

jay_s_uk

@Rushmere3D

@Rushmere3D said in D-Bot/CrusaXY mash up (CoreXY iDEX):

Quick question, am I right in thinking if I want to run two Toolboards on a duet3 I also need a Distribution Board?

Thanks,

J.

Yes, you'll need a distribution board

@Rushmere3D said in D-Bot/CrusaXY mash up (CoreXY iDEX):

Another question while I think of it. Can you modify macros on the paneldue?

no, you can't

Rushmere3D

@jay_s_uk

Thank you.

Rushmere3D

Hi all,

OK a bit of progress, the printer now has the second tool fitting and everything is wired up including now physical end stops rather than sensor-less.

Here a picture of it right now:

alt text

Thanks,

James.