• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Duet3D PCB delta printer effector sneak preview

Scheduled Pinned Locked Moved
Smart effector for delta printers
53
367
77.3k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    fcwilt
    last edited by 5 Aug 2017, 02:33

    @Zesty_Lykle:

    OK, after some work, and a nice discussion with Doug, I have wrapped up the design for the adapter.

    So the Shapeways model is now complete and ready.
    The Thingiverse page holds the 2 models, the legless one and the legged one. (If you look at the adapter standing there you will realise why I am calling it the Grand Piano adapter)

    Shapeways http://shpws.me/OPLc
    Thingiverse https://www.thingiverse.com/thing:2453322

    I download the ZIP file from Thingiverse and the STL files for the "Smart Effector" will not open in Windows 10 3D Builder

    The STL file for the "PCB Effector" will open.

    Is that correct? Or is there something wrong with either the files or Windows 10 3D Builder.

    Thanks.

    Frederick

    Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

    1 Reply Last reply Reply Quote 0
    • undefined
      eddygara
      last edited by 5 Aug 2017, 02:40

      Do you ever plan to release a version compatible with the e3d chimeria hot end??

      1 Reply Last reply Reply Quote 0
      • undefined
        dc42 administrators
        last edited by 5 Aug 2017, 06:46

        Not sure. The Diamond hot end is another one we might consider supporting.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • undefined
          Dougal1957
          last edited by 5 Aug 2017, 07:07

          @fcwilt:

          @Zesty_Lykle:

          OK, after some work, and a nice discussion with Doug, I have wrapped up the design for the adapter.

          So the Shapeways model is now complete and ready.
          The Thingiverse page holds the 2 models, the legless one and the legged one. (If you look at the adapter standing there you will realise why I am calling it the Grand Piano adapter)

          Shapeways http://shpws.me/OPLc
          Thingiverse https://www.thingiverse.com/thing:2453322

          I download the ZIP file from Thingiverse and the STL files for the "Smart Effector" will not open in Windows 10 3D Builder

          The STL file for the "PCB Effector" will open.

          Is that correct? Or is there something wrong with either the files or Windows 10 3D Builder.

          Thanks.

          Frederick

          It opens fine in S3D dont have win 10 so can't comment on 3d Builder

          1 Reply Last reply Reply Quote 0
          • undefined
            Hergonoway
            last edited by 5 Aug 2017, 08:41

            Is there a accurate 3D model of the effector and the custom E3D heatsink somewhere, I would like to make a 40mm blower fan mount 😞

            Delta goes BrrrRRRRrrrrrRRRRrrr

            1 Reply Last reply Reply Quote 0
            • ?
              A Former User
              last edited by 8 May 2017, 09:46 5 Aug 2017, 09:19

              @Hergonoway:

              Is there a accurate 3D model of the effector and the custom E3D heatsink somewhere, I would like to make a 40mm blower fan mount 😞

              David gave the hole spacing's out you can work it all out from there.

              And the link to the drop box files for a fan bracket is in the wiki page so with that information as well you can use it or modify its design

              https://www.dropbox.com/sh/mp3x3ervbkvsq48/AABvZX5nw6XyV4pUJq5rUE3ja?dl=0

              1 Reply Last reply Reply Quote 0
              • undefined
                Dougal1957
                last edited by 5 Aug 2017, 13:45

                AS I said to Lykle I think bringing out the side like that may interfere with the Diagonal rods unless you are very careful

                1 Reply Last reply Reply Quote 0
                • ?
                  A Former User
                  last edited by 8 May 2017, 16:20 5 Aug 2017, 16:13

                  @Dougal1957:

                  AS I said to Lykle I think bringing out the side like that may interfere with the Diagonal rods unless you are very careful

                  Maybe, thats the beauty of playing with it in electronic format, to iron out all the niggles before doing anything, and sacrificing a single LED might be the best way forward

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    Dougal1957
                    last edited by 5 Aug 2017, 16:30

                    you could bring the tube out right next to the LED maybe and the shouldn't block anything

                    1 Reply Last reply Reply Quote 0
                    • ?
                      A Former User
                      last edited by 5 Aug 2017, 17:31

                      And playing some more (ignoring the LED and maybe even removing it)

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        JohnOCFII
                        last edited by 6 Aug 2017, 03:12

                        @Hergonoway:

                        I would like to make a 40mm blower fan mount

                        How about a 50mm blower style? Those are quite common.

                        http://www.ebay.com/itm/DC-12V-2-Pin-0-13A-50mm-Brushless-Turbine-Blower-Cooling-Fan-for-3D-Printer/112417115778?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          Hergonoway
                          last edited by 6 Aug 2017, 06:42

                          @JohnOCFII:

                          @Hergonoway:

                          I would like to make a 40mm blower fan mount

                          How about a 50mm blower style? Those are quite common.

                          http://www.ebay.com/itm/DC-12V-2-Pin-0-13A-50mm-Brushless-Turbine-Blower-Cooling-Fan-for-3D-Printer/112417115778?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

                          I had 50mm for some time, but I like the 40mm compact size, same as classic 40mm fans, but it can be put alongside the e3d for a narrow design. If you take time to search you'll find ones with more than 10CFM

                          Delta goes BrrrRRRRrrrrrRRRRrrr

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            dc42 administrators
                            last edited by 6 Aug 2017, 07:36

                            I haven't yet found a 24V 40mm or 50mm blower fan that works with PWM.

                            Duet WiFi hardware designer and firmware engineer
                            Please do not ask me for Duet support via PM or email, use the forum
                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              Hergonoway
                              last edited by 6 Aug 2017, 08:41

                              @dc42:

                              I haven't yet found a 24V 40mm or 50mm blower fan that works with PWM.

                              same here 😕

                              Delta goes BrrrRRRRrrrrrRRRRrrr

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                Zesty_Lykle
                                last edited by 6 Aug 2017, 17:20

                                I have added a little pipe holder to the adapter on Thingverse.
                                In case you want to use tubing like in a Berd-Air system. Simple tie-wrap to tie the tubing to the holder.

                                https://www.thingiverse.com/thing:2453322

                                Lykle
                                Design, make and enjoy life

                                Co Creator of the Zesty Nimble

                                1 Reply Last reply Reply Quote 0
                                • undefined
                                  T3P3Tony administrators
                                  last edited by 6 Aug 2017, 18:28

                                  It looks like you guys are happy with the dimensions however I have added the annotated diagrams here:
                                  https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer#Dimensions

                                  Nice looking cooling ideas coming through, just be sure yo stay clear of the SMT electronic components that are on the bottom of the board.

                                  www.duet3d.com

                                  1 Reply Last reply Reply Quote 0
                                  • undefined
                                    Zesty_Lykle
                                    last edited by 7 Aug 2017, 07:13

                                    Not having a board, that is kinda tricky, but I think it is OK, looking at the photos.
                                    Thanks for the measurements.

                                    Lykle
                                    Design, make and enjoy life

                                    Co Creator of the Zesty Nimble

                                    1 Reply Last reply Reply Quote 0
                                    • undefined
                                      Rommie
                                      last edited by 7 Aug 2017, 07:51

                                      Anymore updates as to when it's going on to the order pages, need to order a new pt100 sensor and daughtboard so will order all in one if it's not long out

                                      1 Reply Last reply Reply Quote 0
                                      • undefined
                                        jannisj
                                        last edited by 8 Jul 2017, 11:31 7 Aug 2017, 11:30

                                        @Rommie:

                                        Anymore updates as to when it's going on to the order pages, need to order a new pt100 sensor and daughtboard so will order all in one if it's not long out

                                        As soon as it arrives in stock, they will put it on the page.
                                        Hope it arrives soon myself, as I need "everything" 🙂
                                        (Duet wifi, paneldue 5", pcb. hotend kit, ++)

                                        -J

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Rommie
                                          last edited by 7 Aug 2017, 12:57

                                          @jannisj:

                                          @Rommie:

                                          Anymore updates as to when it's going on to the order pages, need to order a new pt100 sensor and daughtboard so will order all in one if it's not long out

                                          As soon as it arrives in stock, they will put it on the page.
                                          Hope it arrives soon myself, as I need "everything" 🙂
                                          (Duet wifi, paneldue 5", pcb. hotend kit, ++)

                                          -J

                                          You will love the duet if you have never used one before, there fantastic and sooooo quiet, loudest thing I have is my beard air pump

                                          1 Reply Last reply Reply Quote 0
                                          279 out of 367
                                          • First post
                                            279/367
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA