PanelDue Firmware 3.3.0-rc2 released
-
Well I found my issue but I'm not sure how I did it. There was, indeed, a typo in the PanelDueFirmware.bin. Somehow I managed to get a leading space or some unprintable character before the P. I can't reproduce adding a leading space as both RRF and Windows will remove a leading space. I didn't notice it in the DWC but when I looked at the card in Windows the filename was shifted one position right.
Sorry for the false alarm.
-
@davea , thanks for the feedback.
-
Since this is a RC2 it is probably not the time asking for new features. But this is more of an adjustment ...
Move the extrusion window a bit lower so the extruder temp can be seen while manually extruding.
-
Hey @fotomas, can you create a seperate thread for this feature request, please?
-
@davea ctrl-shift-space will insert a "nonbreaking space" character which will be hard to see and mess with your head. Maybe that happened.
-
I'm note sure if this is related to this release, or if it's only that I have only just noticed.
It seems that if the PanelDue screensaver activates during a long loop, touching the screen doesn't wake it up afterwards, despite popups like M291 working during the macro loop (whilst the screen saver is active).
-
@owend I was about to post the same issue. Happened yesterday, after a filament runout pause, the panel due was locked on screen saver. Couldn't wake it.
-
@OwenD @KipK thanks for reporting the issue. I will try to reproduce it.
So what i understand the process is:
- wait until screen saver is activated
- then trigger a message M291 to display
And you expect that it should wake up in such a case? Did you realize different behavior with previous versions?
BTW i agree it would be definitely handy if the screen gets activated and shows the message to the user.
Visit me on github at https://github.com/mfs12/
-
@mfs12
No, the M291 worked despite the screen saver being active.
The screen saver could not be woken.
I suspect it's more to do with long loops. -
@owend sorry. to ask again. but now i am getting a little confused. could you please try to describe a step by step process to reproduce the issue. It would be very helpful.
-
@OwenD @KipK the issue displaying M291 message while screen saver is active is tracked now at https://github.com/Duet3D/PanelDueFirmware/issues/147
-
The M291 screensaver bug got fixed. Will be part of 3.3.0-rc3.
-
@mloidl the times left issue describes is going to be fixed with https://github.com/Duet3D/PanelDueFirmware/issues/152
