Small Fdm printer

[peirof]

HI,

I'm looking for recommendation for a printer Fdm DIY.

I'm considering making a printer secondarily to print small things, since the one I have works fine for medium and large, but for small it lacks a bit of resolution.
The print size would be enough with 150 x150x150... I want to get very thin layers, 0.05mm or less.

I have ruled out a DLP, for two reasons, the cost of the resin, and the cumbersomeness of the post-print treatments, as well as the clean

I have see some options, but I would like read your opiniones... Not sure, but seems a corexy, the better option....

Thx...

P.D.: When will there be stock of Duet boards again? And... And how will Brexit affect?

[oliof]

@peirof you could take a look at Tiny-M.

You can get Duet boards from re-sellers without issue.

[peirof]

@oliof Spain reseller its out stock... and some more

[oliof]

@peirof Thankfully, you are in the EU (-: Depending on what you need you can check Dold Mechatronik (Germany), RatRig (Portugal, limited selection), and others.

[PCR]

@peirof https://github.com/hartk1213/Micron

[peirof]

@pcr thanks.... looks good...

[fcwilt]

@peirof said in Small Fdm printer:

HI,

I'm looking for recommendation for a printer Fdm DIY.

So you are looking to build a printer from parts you purchase/make as opposed to kit?

Frederick

[peirof]

@fcwilt i am open to all options....

what i search?

Small
Detail 0.05 layer or less

[Phaedrux]

Voron 0 maybe?

[peirof]

@phaedrux Voron 0, looks great.... for the moment, its preselected...

Thanks to all

[tenaja]

look at the Dice. Might not be big enough for you, but should be precise enough.

[peirof]

This post is deleted!