Small Fdm printer

peirof

HI,

I'm looking for recommendation for a printer Fdm DIY.

I'm considering making a printer secondarily to print small things, since the one I have works fine for medium and large, but for small it lacks a bit of resolution.
The print size would be enough with 150 x150x150... I want to get very thin layers, 0.05mm or less.

I have ruled out a DLP, for two reasons, the cost of the resin, and the cumbersomeness of the post-print treatments, as well as the clean

I have see some options, but I would like read your opiniones... Not sure, but seems a corexy, the better option....

Thx...

P.D.: When will there be stock of Duet boards again? And... And how will Brexit affect?

oliof

@peirof you could take a look at Tiny-M.

You can get Duet boards from re-sellers without issue.

peirof

@oliof Spain reseller its out stock... and some more

oliof

@peirof Thankfully, you are in the EU (-: Depending on what you need you can check Dold Mechatronik (Germany), RatRig (Portugal, limited selection), and others.

PCR

@peirof https://github.com/hartk1213/Micron

peirof

@pcr thanks.... looks good...

fcwilt

@peirof said in Small Fdm printer:

HI,

I'm looking for recommendation for a printer Fdm DIY.

So you are looking to build a printer from parts you purchase/make as opposed to kit?

Frederick

peirof

@fcwilt i am open to all options....

what i search?

Small
Detail 0.05 layer or less

Phaedrux

Voron 0 maybe?

peirof

@phaedrux Voron 0, looks great.... for the moment, its preselected...

Thanks to all

tenaja

look at the Dice. Might not be big enough for you, but should be precise enough.

peirof

This post is deleted!