Low effort Duet controlled air filter: IKEA Förnuftig

pixelpieper

I grabbed one of the IKEA air filters last weekend and was surprised to find out at home that it is actually a 24V device - 800mA, 19W and hence very well suited for being hooked up to a heater output on my Duet 3 Mini…

I tried to find the plugs used by IKEA but failed, so I ended up just cutting the wire. Black is gnd, white is 24V if you want to do the same. I just configured it as a fan in my config.g

Phaedrux

Is that the grey thing behind the purple thing?

pixelpieper

@phaedrux Yes

jay_s_uk

@pixelpieper got a link to it on the IKEA site?

pixelpieper

@jay_s_uk here you go. Note that the VOC activated carbon filter is sold separately.

zapta

@pixelpieper, very nice design. Are you aware of the Nevermore? The micro version for example fits under the bed, between the two rails.

https://github.com/nevermore3d

zapta

@pixelpieper said in Low effort Duet controlled air filter: IKEA Förnuftig:

@jay_s_uk here you go. Note that the VOC activated carbon filter is sold separately.

There are some reports in the Voron forums about activated carbon that is acidic and corrodes the printer, so pick carefully.

I am using this one based on recommendations.

https://envirosupply.net/products/4mm-pellet-virgin-coal-activated-carbon-charcoal-for-vapor-filtration-1-lb-bag?variant=14036431372323