oozeBot Elevate
-
We have just wrapped up the design of our electronics control panel and thought it would be of interest. It features a Duet 3 (6HC) mainboard, a Duet breakout board (IDEX only), a 2gb RPi4b, two Omron SSRs for build plate and chamber heaters, and both a 5v and 24v Meanwell power supply. Hidden underneath the Duet 3 mainboard is a 92mm intake fan with air channels venting towards the power supplies and other electronics.
-
That's slick!
-
@oozebot
I'm not comfortable with the PSUs close to the electronics. I also think the tool distribution board belongs closer to the tools.Just my two cent
-
We should probably just let this old thread die as almost everything posted was during our prototyping phase and has been replaced and/or updated. However, we'll keep it going with new updates instead of littering up the forum.
Here is the near final version of our enclosure which takes some design hints from an 80's arcade machine. Yes, that's real t-molding. It will be sold as a flat pack with optional paint schemes and other extras such as side windows and a few other surprises.
Also, here is our new filament storage chamber design. This is the first of several we are building as we expand our farm. Each holds 12 mega-spools (10kg or 22lb) of ABS filament and feed 6 printers. It's controlled by a Raspberry Pi and a bank of relays to maintain ~20% humidity at 40~45c once stabilized.
And finally, I spent the previous weekend re-tuning both the machine and our filament profiles. Here is a part printed in ABS with the near-finalized profile:
-
@oozebot said in oozeBot Elevate:
instead of littering up the forum.
Nonsense. Feel free to start a new thread if you wish.
-
undefined HebigT referenced this topic
-
undefined HebigT referenced this topic
-
undefined HebigT referenced this topic
-
We had the opportunity to deliver one of our first production machines to Slice Engineering yesterday for their testing! Check out this awesome video they posted this morning of it in action!
-
@oozebot nice
especially like the thumbnail -
@t3p3tony We showcased the Duet3 as much as possible in the control panel!
-
@oozebot The machine looks awesome. I love the cabinet/enclosure you guys designed for the system.
-
Check out this video Slice just posted of one of our machines in action! What they didn't mention is this 200mm tall Spider-man was printed in ABS at 100mm/s (50mm/s external perimeter) in ~8 hours!
