Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    CONSTANT AJAX disconnect errors

    Scheduled Pinned Locked Moved
    General Discussion
    28
    307
    55.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • MiRundefined
      MiR
      last edited by

      I just upgraded to 1.19.2 and I see the same issues as described in callil's comment above.

      Does it help if I do Airtraces with my Mac? If yes, should I do this with 1.19.2 or should I upgrade to 1.20 beta?

      The interesting thing I am seeing is that the duett is still associated to the AP but it is not answering to pings.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        The next DuetWiFiServer release I do will be designed to work with 1.20beta1, or possibly a later 1.20 beta release.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • MiRundefined
          MiR
          last edited by

          I upgraded anyway, it took a little longer until I was unable to use the connection.

          Fun thing is that I still see packet exchange between AP and duet:

          RSSI: -40 dBm
          TXPacketCount
          176423
          RXPacketCount
          20352

          a little later:

          TXPacketCount
          176799
          RXPacketCount
          20744

          I can also still access station stats of the duet:

          /cfg/system/root # wlctl -i wl0 sta_info 5C:CF:7F:37:8A:E3
          [VER 4] STA 5C:CF:7F:37:8A:E3:
          aid:5
          rateset [ 1 2 5.5 6 9 11 12 18 24 36 48 54 ]
          idle 1 seconds
          in network 1857 seconds
          state: AUTHENTICATED ASSOCIATED AUTHORIZED
          flags 0x1e13a: WME PS N_CAP AMPDU AMSDU
          HT caps 0x112c: SGI20 STBC-Rx
          tx total pkts: 177054
          tx total bytes: 47635359
          tx ucast pkts: 23995
          tx ucast bytes: 3712620
          tx mcast/bcast pkts: 153059
          tx mcast/bcast bytes: 43922739
          tx failures: 1
          rx data pkts: 21124
          rx data bytes: 6136443
          rx ucast pkts: 21112
          rx ucast bytes: 6134771
          rx mcast/bcast pkts: 12
          rx mcast/bcast bytes: 1672
          rate of last tx pkt: 72222 kbps - 19500 kbps
          rate of last rx pkt: 6000 kbps
          rx decrypt succeeds: 17064
          rx decrypt failures: 88
          tx data pkts retried: 0
          per antenna rssi of last rx data frame: -47 -40 -41 0
          per antenna average rssi of rx data frames: -46 -40 -40 0
          per antenna noise floor: -94 -97 -96 0
          tx total pkts sent: 23994
          tx pkts retries: 2400
          tx pkts retry exhausted: 1
          tx FW total pkts sent: 64
          tx FW pkts retries: 0
          tx FW pkts retry exhausted: 0
          rx total pkts retried: 2116

          Are you able to turn of Powersave on the esp? I see in the stats that PS flag is set, I have seen numerous errors with Powersave on WiFi

          1 Reply Last reply Reply Quote 0
          • KeeganBundefined
            KeeganB
            last edited by

            And this is tonight's error….

            This was loading DWC about 1 min after a fresh power up of the printer:
            Error reason: SyntaxError: JSON Parse error: Unterminated string

            Then after hitting refresh for the web browser I got a different error that I wasn't able to copy before it disappeared, but I think it ended in "invalid digits."

            after M552 S-1 and S1, this is the new error:
            Error reason: SyntaxError: JSON Parse error: Expected '}'

            EDIT:

            updated to all the latest firmwares from the edge GitHub, disconnects continue. That was expected, but just as an FYI for those following along.

            Artemis
            Rostock Max v2
            Orion

            1 Reply Last reply Reply Quote 0
            • KeeganBundefined
              KeeganB
              last edited by

              Hey David,

              Just checking in on the new firmware. I continue to have disconnects, but haven't done much or posted any further on them in the past few days.

              Artemis
              Rostock Max v2
              Orion

              1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators
                last edited by

                I recall that some of you report that the WiFi is reliable when the printer is idle, but it disconnects a little while after printing starts, even though you are not using high microstepping. It occurs to me that this could be temperature-related. The WiFi module gets warm in normal use, and when the stepper drivers are generating heat as well it could be getting too hot to function properly. So please try the following:

                • Monitor the CPU temperature in DWC until the point at which it disconnects. Is there a significant rise in temperature?
                • Try cooling the Duet with a fan, if you don't already.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                1 Reply Last reply Reply Quote 0
                • KeeganBundefined
                  KeeganB
                  last edited by

                  David,

                  Where in DWC can I see the board temp?

                  Thanks

                  Artemis
                  Rostock Max v2
                  Orion

                  1 Reply Last reply Reply Quote 0
                  • Dougal1957undefined
                    Dougal1957
                    last edited by

                    on any page if you check the Temp area top left you will see an Extras label click it and the MCU temp will appears which you can add to the Line chart if you wish.

                    1 Reply Last reply Reply Quote 0
                    • Jareryundefined
                      Jarery
                      last edited by

                      My Board is mounted above my delta, so bed heat has no effect. The board temp is low to mid 30's when no fan is used. (calibrated just yesterday its about 3 degrees below the PT100 temp)
                      Mine also disconnects while idle.

                      1 Reply Last reply Reply Quote 0
                      • KeeganBundefined
                        KeeganB
                        last edited by

                        @Dougal1957:

                        on any page if you check the Temp area top left you will see an Extras label click it and the MCU temp will appears which you can add to the Line chart if you wish.

                        perfect, thanks!

                        32.8C at idle after being powered on for several hours.

                        Artemis
                        Rostock Max v2
                        Orion

                        1 Reply Last reply Reply Quote 0
                        • KeeganBundefined
                          KeeganB
                          last edited by

                          Over a couple different hour long prints the MCU temp stayed right around 34 C.

                          Artemis
                          Rostock Max v2
                          Orion

                          1 Reply Last reply Reply Quote 0
                          • dc42undefined
                            dc42 administrators
                            last edited by

                            Please can those of you who are experiencing disconnect errors and are running DuetWiFiFirmware 1.20beta1 try changing the wifi firmware to version 1.20alpha1+1, which is available here: https://www.dropbox.com/s/u7vpp2wg4rlqs8l/DuetWiFiServer.bin?dl=1. Then let me know if you think it is better or worse.

                            Duet WiFi hardware designer and firmware engineer
                            Please do not ask me for Duet support via PM or email, use the forum
                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                            1 Reply Last reply Reply Quote 0
                            • Jareryundefined
                              Jarery
                              last edited by

                              DuetWiFiFirmware1.20alpha1+1

                              • Install 6:55
                              • idle
                              • Disconnect 7:55

                              The log showed slightly different times. The disconnect happened at 7:55 but doesn't show on the log till 8:05. It would not connect via connect button during that time.
                              2017-10-12 06:56:11 Event logging started
                              2017-10-12 08:05:21 WiFi reported error: Lost connection, auto reconnecting
                              2017-10-12 08:05:22 WiFi reported error: Auto reconnect succeeded

                              after reconnect M122:
                              Network state is running
                              WiFi module is connected to access point
                              WiFi firmware version 1.20alpha1+1
                              WiFi MAC address a0:20:a6:10:55:89
                              WiFi Vcc 3.16, reset reason Turned on by main processor
                              WiFi flash size 4194304, free heap 38352
                              WiFi IP address 192.168.2.32
                              WiFi signal strength -45dBm
                              Reconnections 1
                              HTTP sessions: 1 of 8
                              Socket states: 2 0 0 0 0 0 0 0
                              Responder states: HTTP(1) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)

                              Edit 2:
                              Left idle it disconnected again, after waiting 30 min Im able to reconnect. Log doesn't show that it ever knew it was disconnected: The 10:10 log is me reconnecting after disconnecting 30 min or so previous
                              2017-10-12 06:56:11 Event logging started
                              2017-10-12 08:05:21 WiFi reported error: Lost connection, auto reconnecting
                              2017-10-12 08:05:22 WiFi reported error: Auto reconnect succeeded
                              2017-10-12 08:58:13 HTTP client 192.168.2.49 login succeeded
                              2017-10-12 10:10:20 HTTP client 192.168.2.49 login succeeded

                              1 Reply Last reply Reply Quote 0
                              • Jareryundefined
                                Jarery
                                last edited by

                                First print, disconnected while printing the skirt

                                1 Reply Last reply Reply Quote 0
                                • dc42undefined
                                  dc42 administrators
                                  last edited by

                                  Thanks for your feedback. Which country are you in?

                                  Duet WiFi hardware designer and firmware engineer
                                  Please do not ask me for Duet support via PM or email, use the forum
                                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                                  1 Reply Last reply Reply Quote 0
                                  • Jareryundefined
                                    Jarery
                                    last edited by

                                    Canada, Vancouver BC specificaly,

                                    1 Reply Last reply Reply Quote 0
                                    • KeeganBundefined
                                      KeeganB
                                      last edited by

                                      Ill be away from the printer for about a week, but will updated to that new version you shared David as soon as I return.

                                      Artemis
                                      Rostock Max v2
                                      Orion

                                      1 Reply Last reply Reply Quote 0
                                      • fmaundefined
                                        fma
                                        last edited by

                                        David, I juste realized that my WiFi signal strength is really low: -68dBm! I think I'm lucky it's working so well, despite such poor signal!

                                        I think I will order the new ESP module, with antenna.

                                        Frédéric

                                        1 Reply Last reply Reply Quote 0
                                        • callilundefined
                                          callil
                                          last edited by

                                          Updated to alpha1+1 - pretty much the same story for me unfortunately.
                                          The following log is right after a disconnect when idle. I restarted the wifi module with M552 on device.

                                          [[language]]
                                          === Diagnostics ===
                                          Used output buffers: 3 of 32 (17 max)
                                          === Platform ===
                                          RepRapFirmware for Duet WiFi version 1.20beta1 running on Duet WiFi 1.0
                                          Board ID: 08DAM-9K9K2-NGNSN-6JKD0-3SJ6T-15UBM
                                          Static ram used: 15128
                                          Dynamic ram used: 96048
                                          Recycled dynamic ram: 3512
                                          Stack ram used: 1352 current, 4880 maximum
                                          Never used ram: 11504
                                          Last reset 00:06:35 ago, cause: reset button or watchdog
                                          Last software reset reason: User, spinning module GCodes, available RAM 11504 bytes (slot 3)
                                          Software reset code 0x0003, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x00400000, BFAR 0xe000ed38, SP 0xffffffff
                                          Error status: 0
                                          Free file entries: 10
                                          SD card 0 detected, interface speed: 20.0MBytes/sec
                                          SD card longest block write time: 0.0ms
                                          MCU temperature: min 41.1, current 41.6, max 42.8
                                          Supply voltage: min 24.1, current 24.2, max 24.6, under voltage events: 0, over voltage events: 0
                                          Driver 0: stalled standstill
                                          Driver 1: stalled standstill
                                          Driver 2: stalled standstill
                                          Driver 3: standstill
                                          Driver 4: standstill
                                          Date/time: 2017-10-15 15:01:57
                                          Slowest main loop (seconds): 0.008844; fastest: 0.000033
                                          === Move ===
                                          MaxReps: 0, StepErrors: 0, FreeDm: 240, MinFreeDm 240, MaxWait: 0ms, Underruns: 0, 0
                                          Scheduled moves: 0, completed moves: 0
                                          Bed compensation in use: none
                                          Bed probe heights: 0.000 0.000 0.000 0.000 0.000
                                          === Heat ===
                                          Bed heater = 0, chamber heater = -1
                                          Heater 0 is on, I-accum = 0.0
                                          Heater 1 is on, I-accum = 0.3
                                          === GCodes ===
                                          Segments left: 0
                                          Stack records: 1 allocated, 0 in use
                                          Movement lock held by null
                                          http is idle in state(s) 0
                                          telnet is idle in state(s) 0
                                          file is idle in state(s) 0
                                          serial is idle in state(s) 0
                                          aux is idle in state(s) 0
                                          daemon is idle in state(s) 0
                                          queue is idle in state(s) 0
                                          autopause is idle in state(s) 0
                                          Code queue is empty.
                                          Network state is running
                                          WiFi module is connected to access point 
                                          WiFi firmware version 1.20alpha1+1
                                          WiFi MAC address 5c:cf:7f:ef:4c:24
                                          WiFi Vcc 3.11, reset reason Turned on by main processor
                                          WiFi flash size 4194304, free heap 35064
                                          WiFi IP address 192.168.1.107
                                          WiFi signal strength -58dBm
                                          Reconnections 0
                                          HTTP sessions: 1 of 8
                                          Socket states: 2 0 0 0 0 0 0 0
                                          Responder states: HTTP(1) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
                                          
                                          
                                          1 Reply Last reply Reply Quote 0
                                          • JohnOCFIIundefined
                                            JohnOCFII
                                            last edited by

                                            I've been leery of updating beyond 1.18.2 due to the frequent reports of WiFi issues. Today I decided to take the leap. The upgrade to 1.19.2 went well. Checking M122 my RSSI varied between -53 and -58 (the access point is one floor away in a wood framed house). I stayed connected from a web browser (Google Chrome from a Mac) for approximately 4 hours. During the middle of that 4 hour window was a single 90 minute print.

                                            All seemed good. Not posting to gloat - but just wanted to add some data points. My access point is an Asus router running the third party Asus-Merlin firmware.

                                            John

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA