Non Duet Hardware with RRF ?

[A Former User]

This post is deleted!

[jay_s_uk]

@Herve_Smith said in Non Duet Hardware with RRF ?:

@jay_s_uk
@R4ffers

I just drew up a modified version of the "tap" that is lighter, uses less hardware and uses a pair of cross roller guides instead of a linear rail for stability

Cross roller guides? Do you have a link to those?

[A Former User]

This post is deleted!

[jay_s_uk]

@Herve_Smith thanks. I've ordered a set in preparation

[A Former User]

This post is deleted!

[R4ffers]

@Herve_Smith awesome thanks for this, just ordered a set

[R4ffers]

@Herve_Smith which sensor have you used and is that a spring?

[A Former User]

This post is deleted!

[R4ffers]

@Herve_Smith that's them ordered too. many thanks

[jay_s_uk]

@Herve_Smith Are you able to share your files?

[A Former User]

This post is deleted!

[pixelpieper]

@Herve_Smith I have this experimental one which mounts the 1LC in the flap, leaves just enough room to allow for the chain and exposes the two buttons which I have programmed to extrude/retract

[toxs]

@pixelpieper do you share your cad files somewhere?

[FlyingAspect]

@Herve_Smith where can I find the stl file for this stealthburner duet 1LC cover? Would love to do the same.

[The_Mechanic]

@pixelpieper
Are there any news on your project or is it possible to continue working on it (if you may share the files)?
I really like your approach and want to use is for my Voron Switchwire.