Compiling/Building PanelDue Firmware

[R006]

@dc42 ArmGccPath is C:\Program Files (x86)\GNU Arm Embedded Toolchain\10 2020-q4-major\bin

[dc42]

@R006 and is file arm-none-eabi-objcopy.exe in that folder?

[R006]

@dc42 yes
but as per error c:/program files (x86)/gnu arm embedded toolchain/10 2020-q4-major/bin/sh: /arm-none-eabi-objcopy: not found may be it's search in sh folder

[R006]

This post is deleted!

[oliof]

@R006 remove /sh from the path

[R006]

@dc42 thank you for support .
now i am able to build it. and generating PanelDueFirmware.bin file successfully by changing the name of ArmGccPath.

but after flashing successfully & restart panel, it was blank.

Any Suggestions?@chrishamm

[R006]

@dc42 @chrishamm can any one try my build bin file of panelduefirmware & Check what's wrong in that file & check in your panel if it's working or not.
Firmware varsion:3.4.beta3
souce code of panel:https://github.com/Duet3D/PanelDueFirmware
bin file:68a650ee-e619-4847-8f02-267908ce9181-PanelDueFirmware-v2-7.0.bin

[dc42]

@R006 where is your binary file, and which build configuration is it?

[R006]

This post is deleted!

[dc42]

@R006 I am away for a few days, but in any case I'm not sure I have a version 2 PanelDue board left. Perhaps @mfs12 can test your binary.

[R006]

@dc42 thank you for your support now it's working fine.