Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    how the heating control operates

    Scheduled Pinned Locked Moved Solved
    Tuning and tweaking
    4
    26
    448
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • luca Massimilianoundefined
      luca Massimiliano @luca Massimiliano
      last edited by

      @luca-Massimiliano
      GOOD MORNING I HAVE A Duet 2 WiFi, AFTER THE UPDATE TO THE LATEST VERSION 3.5.2 ON THE DASHBORD, ONCE THE SET HEATER TEMPERATURE HAS BEEN REACHED, THE EXTRUSION CONTROL BAR CANNOT BE USED, INSTEAD THE DISPLAY IF USED GIVES THE FOLLOWING ERROR error: attempting to extrude with no tools selected. here is the config
      ; Heaters
      M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
      M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
      M307 H0 B1 S1.00 ; enable bang-bang mode for the bed heater and set PWM limit
      M140H0 ; map heated bed to heater 0
      M143 H0 S120 ; set temperature limit for heater 0 to 120C
      M308 S1 P"e0temp" Y"thermistor" T100000 B4388 ; configure sensor 1 as thermistor on pin e0temp
      M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
      M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
      M143 H1 S280 ; set temperature limit for heater 1 to 280C
      M308 S2 P"e1temp" Y"thermistor" T100000 B4388 ; configure sensor 2 as thermistor on pin e1temp
      M950 H2 C"e1heat" T2 ; create nozzle heater output on e1heat and map it to sensor 2
      M307 H2 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
      M143 H2 S280 ; set temperature limit for heater 2 to 280C

      ; Fans
      M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
      M106 P0 S0 H1 T100 ; set fan 0 value. Thermostatic control is turned on
      M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
      M106 P1 S1 H2 T100 ; set fan 1 value. Thermostatic control is turned on

      ; Tools
      M563 P1 S"LUCA1" D0 H1 F0 ; define tool 1
      G10 P1 X12.8 Y3.9 Z0 ; set tool 1 axis offsets
      G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C
      M563 P2 S"LUCA2" D1 H2 F0 ; define tools 2
      G10 P2 X-12.8 Y3.9 Z0 ; set tool 2 axis offsets
      G10 P2 R0 S0 ; set initial tool 2 active and standby temperatures to 0C

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @luca Massimiliano
        last edited by

        @luca-Massimiliano you need a tool to be active.
        Send Tx where X is the tool number that you want to drive

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
        • luca Massimilianoundefined
          luca Massimiliano @jay_s_uk
          last edited by

          @jay_s_uk
          how should I put it in the config

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @luca Massimiliano
            last edited by

            @luca-Massimiliano you have two tools so it depends which one you want to be active when you first turn on the machine
            Either add T1 to the end of the config or T2

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            oliofundefined luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
            • oliofundefined
              oliof @jay_s_uk
              last edited by

              @jay_s_uk rather T0 or T1?

              <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

              jay_s_ukundefined 1 Reply Last reply Reply Quote 0
              • luca Massimilianoundefined
                luca Massimiliano @jay_s_uk
                last edited by

                @jay_s_uk
                I don't understand in which config .g command should I add t0 and t1? the problem is that the commands on the dashboard and on the duet display are not activated if I send the extrusion error: trying to extrude with no tools selected.

                oliofundefined 1 Reply Last reply Reply Quote 0
                • oliofundefined
                  oliof @luca Massimiliano
                  last edited by

                  @luca-Massimiliano just add either T0 or T1 on the end of config.g

                  <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                  1 Reply Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @oliof
                    last edited by

                    @oliof he has the tools setup as T1 and T2

                    @luca-Massimiliano said in how the heating control operates:

                    ; Tools
                    M563 P1 S"LUCA1" D0 H1 F0 ; define tool 1
                    G10 P1 X12.8 Y3.9 Z0 ; set tool 1 axis offsets
                    G10 P1 R0 S0 ; set initial tool 1 active and standby temperatures to 0C
                    M563 P2 S"LUCA2" D1 H2 F0 ; define tools 2
                    G10 P2 X-12.8 Y3.9 Z0 ; set tool 2 axis offsets
                    G10 P2 R0 S0 ; set initial tool 2 active and standby temperatures to 0C

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    oliofundefined luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
                    • oliofundefined
                      oliof @jay_s_uk
                      last edited by

                      @jay_s_uk well ok then (-: That'll confuse the average slicer tho

                      <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                      luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                      • luca Massimilianoundefined
                        luca Massimiliano @jay_s_uk
                        last edited by

                        @jay_s_uk
                        I inserted t1 and t2 without anything else and it works, but I never did it in previous versions and it worked anyway, has it been changed in this version?

                        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                        • luca Massimilianoundefined
                          luca Massimiliano @oliof
                          last edited by

                          @oliof
                          now I try to send a print with slicer,

                          1 Reply Last reply Reply Quote 0
                          • jay_s_ukundefined
                            jay_s_uk @luca Massimiliano
                            last edited by

                            @luca-Massimiliano you shouldn't insert both of them into the config, just one of them.
                            you can only have one active tool at a time.
                            and no changes i'm aware of in that area for ages

                            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                            luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                            • luca Massimilianoundefined
                              luca Massimiliano @jay_s_uk
                              last edited by

                              @jay_s_uk Now I try again but with a declared tool if activated first the second one doesn't work

                              luca Massimilianoundefined jay_s_ukundefined 2 Replies Last reply Reply Quote 0
                              • luca Massimilianoundefined
                                luca Massimiliano @luca Massimiliano
                                last edited by

                                @luca-Massimiliano
                                I had version 3.2.2 before and didn't declare the first extruder

                                1 Reply Last reply Reply Quote 0
                                • jay_s_ukundefined
                                  jay_s_uk @luca Massimiliano
                                  last edited by

                                  @luca-Massimiliano again, you can only have one tool active at a time. if you want to use the other tool, send its T number in the console.
                                  Your slicer should send "T1" and "T2" when it wants to swap tools

                                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                  luca Massimilianoundefined 2 Replies Last reply Reply Quote 0
                                  • luca Massimilianoundefined
                                    luca Massimiliano @jay_s_uk
                                    last edited by

                                    @jay_s_uk
                                    Could you help me find the extrusion declaration in the manual.

                                    droftartsundefined 1 Reply Last reply Reply Quote 0
                                    • droftartsundefined
                                      droftarts administrators @luca Massimiliano
                                      last edited by droftarts

                                      @luca-Massimiliano

                                      Could you help me find the extrusion declaration in the manual.

                                      https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#tool-control
                                      https://docs.duet3d.com/User_manual/Reference/Duet_Web_Control_Manual#extrusion-control

                                      Ian

                                      Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : TronXY X5S with Duet 3 MB6HC and Roto toolboard

                                      luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                                      • luca Massimilianoundefined
                                        luca Massimiliano @droftarts
                                        last edited by

                                        This post is deleted!
                                        luca Massimilianoundefined 1 Reply Last reply Reply Quote 0
                                        • luca Massimilianoundefined
                                          luca Massimiliano @luca Massimiliano
                                          last edited by

                                          This post is deleted!
                                          1 Reply Last reply Reply Quote 0
                                          • luca Massimilianoundefined
                                            luca Massimiliano @jay_s_uk
                                            last edited by

                                            @jay_s_uk
                                            OK I THINK I HAVE SOLVED IT THANK YOU, I HAVEN'T FOUND ANYTHING IN THE MANUAL THAT INDICATES YOUR SUGGESTION

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA