Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Firmware 2.0RC6 and 1.21.1RC6 released

    Scheduled Pinned Locked Moved
    Firmware installation
    15
    49
    7.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators @Donpi
      last edited by

      @donpi said in Firmware 2.0RC6 and 1.21.1RC6 released:

      Hi,
      I think I found a little bug.
      (However I'm not sure it'is caused by the new release.)

      It start the load filament macro on Tool 0, and when i see that this was not the correct macro, I shuted down the Duet.
      When powered up again. I can no more right click on Tool 0 to use the filament macro.

      Tool 1 keep working right.

      Bye.

      Does reloading DWC fix this?

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      Donpiundefined 1 Reply Last reply Reply Quote 0
      • Donpiundefined
        Donpi @dc42
        last edited by

        @dc42

        Sorry but what is DWC ?

        1 Reply Last reply Reply Quote 0
        • dc42undefined
          dc42 administrators
          last edited by

          Duet Web Control.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          Donpiundefined 1 Reply Last reply Reply Quote 0
          • resamundefined
            resam @dc42
            last edited by

            @dc42 regarding the number of gcode files per folder and moving them into subfolders:

            I think there is no g-code to move or rename a file on the SD card.
            M30 deletes a file - but thats about it...

            DWC has rr_move and rr_mkdir and rr_delete.
            Would be nice to add this to the Firmware wishlist.

            Looking through https://reprap.org/wiki/G-code, it seems no other firmware supports this either...
            All the "good" numbers around M20-M30 that do things with the SD card are already taken.

            1 Reply Last reply Reply Quote 1
            • Donpiundefined
              Donpi @dc42
              last edited by

              @dc42 Haha ok

              Totaly powering of the Duet does nothing.
              But maybe i have a cache problem.
              I'll try tonight.

              1 Reply Last reply Reply Quote 0
              • wilrikerundefined
                wilriker
                last edited by

                Just finished a 3:45h print successfully with no issues apart from warping - but that is clearly not a problem of the Duet. 😉 👍

                Manuel
                Duet 3 6HC (v0.6) with RPi 4B on a custom Cartesian
                with probably always latest firmware/DWC (incl. betas or self-compiled)
                My Tool Collection

                1 Reply Last reply Reply Quote 0
                • zerspaner_gerdundefined
                  zerspaner_gerd
                  last edited by

                  @dc42 said in Firmware 2.0RC6 and 1.21.1RC6 released:

                  @zerspaner_gerd said in Firmware 2.0RC6 and 1.21.1RC6 released:

                  Unfortunately, I still have an unstable DWC connection.

                  It will show "pending" for a long time (about 2 seconds), then "failed" and from then on DWC will not be updated anymore.

                  Are you able to reconnect DWC after the error?

                  Yes, I can immediately press on Disconnect Connect.

                  Have you increased the AJAX retry count in DWC from the default of 1?

                  I have played with this attitude something (up to 2) without change.

                  I suspect there may have been a change in your WiFi environment - in which case, reverting to firmware 1.21 will show the same problem (if the change in the environment is still present).

                  It's enough if I downgrade to DWC 1.21

                  Current combination:

                  Firmware Version: 2.0 (RTOS) RC6 (2018-05-29b4)
                  WiFi server version: 1.21
                  Web Interface Version: 1.21

                  No noticeable delays. (over an hour) With 1.21.1 it was between 10 seconds and a maximum of 5 minutes.

                  The debug mode shows the same error, only the difference is, it just continues after the error.

                  0_1527717963254_DWC 1.21 Debug.png

                  So it seems to me that the cause of DWC is not RFF, right?

                  @donpi said in Firmware 2.0RC6 and 1.21.1RC6 released:

                  I can no more right click on Tool 0 to use the filament macro.

                  I can confirm that, that's exactly the case with me. I already wrote it at RC5.
                  https://forum.duet3d.com/topic/5394/new-firmware-2-0rc5-available/74

                  Board: Duet WiFi 1.03 | Firmware Version: 3.1.1 | WiFi Server Version: 1.23 | Web Interface Version: 3.1.1

                  1 Reply Last reply Reply Quote 0
                  • 3dmntbighkerundefined
                    3dmntbighker
                    last edited by

                    Installed rc6 in my coreXY and so far so good. I don't have many extra goodies yet to trip it up of course.

                    Scratch built CoreXY with Maestro
                    Heavily modified Ender 3 with Maestro
                    MPCNC work in progress with Duet WiFi

                    1 Reply Last reply Reply Quote 0
                    • Danalundefined
                      Danal
                      last edited by

                      Installed on BFD (Big Fast Delta).

                      Firmware Name:	RepRapFirmware for Duet 2 WiFi/Ethernet
                      Firmware Electronics:	Duet WiFi 1.02 or later
                      Firmware Version:	2.0(RTOS)RC6 (2018-05-29b4)
                      WiFi Server Version:	1.21
                      Web Interface Version:	1.21.1
                      
                      Collected Data
                      Warm-Up Time	Current Layer Time	Last Layer Time		Print Duration
                      01m 36s		09s			58s			8h 44m 53s
                      
                      Estimations
                      Based on	Filament Usage	File Progress	Layer Time
                      Time Left	16h 37m 49s	22h 27m 39s	24h 54m 39s
                      

                      No issues.

                      Delta / Kossel printer fanatic

                      1 Reply Last reply Reply Quote 0
                      • SM3Dundefined
                        SM3D
                        last edited by

                        @dc42 you are right. I took the SD card and made subfolders to make sure there are less than 25 files in each folder. Now I see all the files in DWC.

                        I did a small 1 hour print and no issues so far.

                        Cheers,
                        Vasan

                        Good judgement comes from experience but experience comes from bad judgements

                        1 Reply Last reply Reply Quote 0
                        • timcurtis67undefined
                          timcurtis67
                          last edited by

                          Just ran a 8 hr print with no issues. Running IDEX ditto printing with both heads at the same time.

                          Works great so far.

                          1 Reply Last reply Reply Quote 0
                          • SM3Dundefined
                            SM3D
                            last edited by

                            @dc42 I noticed one more issue. It happened twice after 2.0RC6 upgrade (past 2 days) - whenever I update the config.g file, DWC says it cannot be updated and loses connection. It shows under system editor only config.g.bak but no config.g files.

                            When I shut down the printer and restart again, it cannot connect or show my tools because config.g is not present. I have to take the SD card out and rename config.g.bak to config.g to make things work again. This never happened to me in previous upgrades.

                            Cheers,
                            Vasan

                            Good judgement comes from experience but experience comes from bad judgements

                            resamundefined 1 Reply Last reply Reply Quote 0
                            • Donpiundefined
                              Donpi
                              last edited by Donpi

                              Today I tried to print with two extruder and get a strange behaviour.

                              I'm printing the Kisslicer Wizzard box with extruder 1 to the raft and extruder 0 to the main object.

                              And when the printer change from tools 1 to tool 0, the Duet switches to full steps. The print becom impossible as everthing goes 256 x faster and is 256 x bigger.

                              That worked at lest once with firmware 1.21.

                              May that help

                              PS : I checked the gcode after M92, M350 and M569 but fond none of them.

                              1 Reply Last reply Reply Quote 0
                              • resamundefined
                                resam @SM3D
                                last edited by

                                @sm3d said in Firmware 2.0RC6 and 1.21.1RC6 released:

                                It shows under system editor only config.g.bak but no config.g files.
                                When I shut down the printer and restart again, it cannot connect or show my tools because config.g is not present. I have to take the SD card out and rename config.g.bak to config.g to make things work again. This never happened to me in previous upgrades.

                                I had the same thing happen to my printer once, maybe 2-3 months ago. Don't remember which FW I had back then, maybe 1.20?
                                So, I don't think this is a new thing.

                                1 Reply Last reply Reply Quote 0
                                • daveidmxundefined
                                  daveidmx
                                  last edited by daveidmx

                                  After reorganizing my /sys files into subfolders (to get down below the limit so they call appear in DWC) I noticed that subfolders of /sys don't appear on DWC either. Would that be a DWC feature request, or is there firmware-side support needed too?

                                  Is there a different way I should be doing this to maintain DWC editability of all my config files? (I can move some of them to /macros, but it wouldn't make sense for them ever to show up on the UI to be called individually. Is that what's expected, though?)

                                  dc42undefined 1 Reply Last reply Reply Quote 0
                                  • 3dmntbighkerundefined
                                    3dmntbighker
                                    last edited by 3dmntbighker

                                    I printed two test cubes last night on my coreXY on RC6 and i notice each is actually a slight offset parallelogram. So it would be a slight shift in X. Any ideas? The cubes are only an inch square. I don't recall this behavior before.

                                    edit: Apparently this is a common coreXY issue, but so far I can't see any obvious mechanical cause for the distortion. Presumably though there must be one somewhere 😞

                                    Scratch built CoreXY with Maestro
                                    Heavily modified Ender 3 with Maestro
                                    MPCNC work in progress with Duet WiFi

                                    1 Reply Last reply Reply Quote 0
                                    • Danalundefined
                                      Danal
                                      last edited by

                                      Just completed a 37 hour print, including running out of filament that I didn't catch for an hour, editing G-Code file, restarting, etc, etc, etc.

                                      All on RC6 on a large-ish delta. No issues.

                                      Delta / Kossel printer fanatic

                                      1 Reply Last reply Reply Quote 0
                                      • timcurtis67undefined
                                        timcurtis67
                                        last edited by timcurtis67

                                        Been running since last Thurday evening on prints that range from 2 hrs to 10 hrs without any issues. Using both print heads (changing tool and ditto printing).

                                        The only thing I have found so far is the DWC time is way ahead of the paneldue time. I'm pretty sure this is a known issue and due to using Z hop (which I am using).

                                        Otherwise it's working perfect.

                                        1 Reply Last reply Reply Quote 0
                                        • dc42undefined
                                          dc42 administrators @daveidmx
                                          last edited by

                                          @daveidmx said in Firmware 2.0RC6 and 1.21.1RC6 released:

                                          After reorganizing my /sys files into subfolders (to get down below the limit so they call appear in DWC) I noticed that subfolders of /sys don't appear on DWC either. Would that be a DWC feature request, or is there firmware-side support needed too?

                                          Is there a different way I should be doing this to maintain DWC editability of all my config files? (I can move some of them to /macros, but it wouldn't make sense for them ever to show up on the UI to be called individually. Is that what's expected, though?)

                                          How many files do you have in in /sys? The number of files in /sys ought to be small enough that displaying all of them isn't a problem. It's the /gcodes folder that causes a problem when the number of files is large.

                                          Duet WiFi hardware designer and firmware engineer
                                          Please do not ask me for Duet support via PM or email, use the forum
                                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                                          1 Reply Last reply Reply Quote 0
                                          • 3dmntbighkerundefined
                                            3dmntbighker
                                            last edited by 3dmntbighker

                                            After a lot of tweaking to control blobbing I started a 12 hour PETG vase print last night running RC5. I still can't do a filament load, but the print was looking very good as far as layer quality. This morning I found the printer stopped dead in mid-print. All of the normal lights were lit on the board except the wifi light was off. I hit reset and it came up normally. I don't have any way to determine what may have happened with about a third of the vase left to print. And yesterday during the tweaking phase I seem to have caused a low temp failure by pausing a print. The screen dialog indicated I could have resumed the print after resetting the printer, but it wasn't clear how. Is this a development feature that isn't actually implemented yet?

                                            edit: Oops, looks like I had a power dropout that caused the printer to stop dead. So that mystery is solved at least.

                                            Scratch built CoreXY with Maestro
                                            Heavily modified Ender 3 with Maestro
                                            MPCNC work in progress with Duet WiFi

                                            1 Reply Last reply Reply Quote 1
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA