Triangle Labs hotend compatible to smart effector?

[Barracuda72]

Hi, anyone tried this hotend from Triangle Labs?

Looks like it could be compatible to the smart effector.

[T3P3Tony]

@barracuda72 it does look like it would be compatible. It's an e3d clone though so performance may be variable

[timothyz]

@t3p3tony
Triamglelab's quality has been leagues ahead of other clones... Most of their products are outstanding (I haven't had anything where I felt the quality was less than I would expect from my genuine e3d products.

All in all, I'm to the point where I only buy from them if they offer the product over e3d. They even have a cloned BMG that looks like it might be a hair better than the official. (They use GF reinfored injection molded plastic for the housing).

Very impressed, they've taken the initiative to shift the narrative and produce quality products.

-Tim

[Barracuda72]

the prob is..you cant get the Smart effector hot end alone..from time to time i want to print PLA..now i use a titan full metal heatbreak..works flawless with Petg and everthing what need higher print temps...but with some PLA brands i´ve got probs. But 60€ for a complete 2nd effector unit is too much..so i just prep a 2nd hotend..with inliner for PLA

[Dougal1957]

@barracuda72 you can get the smart heatsink on it's own Screw mount heatsink V6

[Barracuda72]

Thx for the link...unfortunatly only in the UK it seems...so..quite expensive..for less i´ll try the whole Hotend from Trianglelabs...will report if its a 100% fit

[crynool]

filastruder in the US carry it as well

[elmoret]

https://www.filastruder.com/products/v6-threaded-heatsink

Don't delay, buy today.

[Depp]

@barracuda72 Hi. How is it going? Did you manage to install this radiator?