PanelDue firmware 1.23 now available
-
It may be that highlighting an axis being NOT homed is more important than highlighting when an axis has been homed. Usually, when the axis has been homed already, you don't ever need to press that button again -- greying out makes sense in this context.
Definitely, though, achieving consistency between DWC and PD is a good goal.
-
@phaedrux
Thank you that was fine, everything is working now. -
@dc42 Thank you Logo work finefor me.
-
After update of my 7i there is always a "residual" contour of the warning windows at the right.
-
@brunofporto That's been reported and fixed. See the first post for link to 1.23.2.
-
@phaedrux Sorry then
I'll look for it, thank you! -
Hello,
For the V2 versions you will find an update file to put its logo.
Thank you -
@synergy41 said in PanelDue firmware 1.23 now available:
Hello,
For the V2 versions you will find an update file to put its logo.
Thank youIf your v2 PanelDue has the ATSAM3S4B processor (not the ATSAM3S2B) then you can add the logo to the standard file, just as you would add the logo to the -nologo files for V3.
-
@dc42
BIG THANKS for the new arrows! (Would be great if they could also be updated in the DWC the same way to have it consistent) -
I like the dark2 too !!!
Is really useful during the night work. All the time i watched the old light version it was a flash !
Thanks buddies -
hello they are a bug with translation to french some word messing
-
See my response to your other thread.
