Smart Effector Part Cooling, what's everyone using?

[bartolomeus]

This is what I use: https://www.thingiverse.com/thing:2909853

[themelle]

@bartolomeus said in Smart Effector Part Cooling, what's everyone using?:

This is what I use: https://www.thingiverse.com/thing:2909853

I can second that - this is by far the best solution in terms of raw part cooling performance I have come across so far.
Every other solution I tried did not offer even remotely sufficient part cooling performance.

That said, my long-term plan is to go for a frame-mounted CPAP blower and a CPAP tube to the effector (see Mark Rehorst's blog at https://drmrehorst.blogspot.com/2018/04/the-mother-of-all-print-cooling-fans.html).
Might save some weight on the effector and provide ample cooling power.

[kookaburra]

@themelle did you succeed with the smart effector CPAP design?

[rjenkinsgb]

I use this setup from Thingiverse, with the E3D V6 hotend heatsink from the kit, titanium heat break, plated copper block & 0.4mm Olsson ruby nozzle.
https://www.thingiverse.com/thing:3893311

That's with a Flex3drive system, so like this on top:
https://flex3drive.com/product/g5-flex-for-duet-smart-effector/

The end result is very light but as precise as a direct drive setup.

[Fred-Y]

I have been working on a dual berd air pump setup lately for high speed.

One this design the 2 pumps are combined before the pipes, the new version have one pump dedicated to in internal pipes and the other to to external pipes.

I'm not an expert on CAD

[weed2all]

@nexxcat I'm using my own designed fan mount for smart effector
https://www.thingiverse.com/thing:3960474

[blt3dp]

Using my own design as well. Using with Smart Effector v2, Revo, 2x 3010 blower fans and accelerometer.

https://cad.onshape.com/documents/08f479c5744e9a5daa711656/w/26ca6233e59d70953ce80476/e/0c329ee272cb5dea67e6660d?renderMode=0&uiState=62bde313f33a9b56662d05db

[apak]

I´ve got this
https://www.thingiverse.com/thing:4832361

[blt3dp]

@weed2all said in Smart Effector Part Cooling, what's everyone using?:

@nexxcat I'm using my own designed fan mount for smart effector
https://www.thingiverse.com/thing:3960474

I like this one, I'd like to see about fitting it to my setup, happen to have the step files?

[Fred-Y]

I'm made a new version for the Bred Air pump specifically designed to the Rapido (standard or UHF)

It can be downloaded here: https://www.thingiverse.com/thing:5472580

This design is not compatible with the Revo as it is shorter, I am working on a new version with the tubes on the side.