Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Novel/Unusual/Large printer videos wanted

    Scheduled Pinned Locked Moved
    My Duet controlled machine
    16
    27
    2.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T3P3Tonyundefined
      T3P3Tony administrators @PaulHew
      last edited by

      @paulhew very possibly. If you have a nice clip of it bed levelling maybe?

      www.duet3d.com

      1 Reply Last reply Reply Quote 0
      • mrehorstdmdundefined
        mrehorstdmd
        last edited by

        In the next few days I'll be installing a Duet WiFi in my sand table- a 1.9 x 1 m corexy machine.

        Here's an old video of it running: https://vimeo.com/290296213

        I'm in the process of making it run quietly by running high microstepping ratios and gearing up the motors so they turn slowly even as the mechanism moves fast. I'll be shooting some fresh video of it when I have made the changes (mechanical stuff is done- just waiting for the Duet board).

        UMMD, my tall corexy printer, is Duet powered. Here's an old video: https://vimeo.com/235837261

        https://drmrehorst.blogspot.com/

        T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
        • T3P3Tonyundefined
          T3P3Tony administrators @mrehorstdmd
          last edited by

          @mrehorstdmd that is a cool sand table! I would love to use a clip or two once its switched over.

          www.duet3d.com

          1 Reply Last reply Reply Quote 0
          • grabercarsundefined
            grabercars
            last edited by

            This is the Cerberus Gigante Deltabot. 5' x 34" print envelope. I didn't use the expansion board, but I am using Duet2 wifi with external drivers which theoretically 'could' have been connected that way? In any case, it's a cool deltabot project. Currently in operation at Arizona State University in the Grant Street Studios 3D media lab location. I'm the 6'3" shiny headed dude in the photo, for size reference. 😉

            First day, delivery!
            0_1567548987240_ASU Grant Street Studios Gigante 3D Deltabot.jpg

            Or just a big tornado print that was ready when I came back the next morning?
            0_1567549352837_ASU Grant Street Studios Gigante 3D Deltabot 2.jpg

            1 Reply Last reply Reply Quote 1
            • oliofundefined
              oliof
              last edited by

              When is TCT exactly? I might set up my SCARA arm again if I have some time to do so.

              <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

              Dougal1957undefined 1 Reply Last reply Reply Quote 0
              • Dougal1957undefined
                Dougal1957 @oliof
                last edited by

                @oliof said in Novel/Unusual/Large printer videos wanted:

                When is TCT exactly? I might set up my SCARA arm again if I have some time to do so.

                24-26 Sept

                T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
                • T3P3Tonyundefined
                  T3P3Tony administrators @Dougal1957
                  last edited by

                  @oliof yep 24-26 september, but we will be putting the video togethe rover the next week or so.

                  www.duet3d.com

                  1 Reply Last reply Reply Quote 1
                  • oliofundefined
                    oliof
                    last edited by

                    I'll prioritize it for early next week then (-;

                    <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                    1 Reply Last reply Reply Quote 0
                    • oliofundefined
                      oliof
                      last edited by

                      @T3P3Tony unfortunately, I lost my old config and the new one does exhibit some problems I solved the first time around, but don't remember how .... but I got a nice homing sequence. See https://youtu.be/cRcnrH5-Lzw and decide whether you can use it or not.

                      <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                      1 Reply Last reply Reply Quote 0
                      • KajRepundefined
                        KajRep
                        last edited by KajRep

                        Hello
                        Hello this is my homemade printer.
                        I can print 570 mm x 570 mm x 570 mm.

                        threema-20181229-181715-8eb88604e31a9b13.jpg

                        I printed a cat toilet for my cat

                        IMG_20190722_172832.jpg

                        IMG_20190817_082825.jpg

                        Videos on Youtube
                        KajRep01
                        KajRep02
                        KajRep03

                        T3P3Tonyundefined KajRepundefined 2 Replies Last reply Reply Quote 0
                        • T3P3Tonyundefined
                          T3P3Tony administrators @KajRep
                          last edited by

                          @KajRep thanks!

                          www.duet3d.com

                          1 Reply Last reply Reply Quote 0
                          • KajRepundefined
                            KajRep @KajRep
                            last edited by

                            This post is deleted!
                            1 Reply Last reply Reply Quote 0
                            • CNCModellerundefined
                              CNCModeller
                              last edited by CNCModeller

                              Hi Folks,
                              This is my polar printer, it's down for a bed bearing upgrade at the moment, but she's definitely running and the duet's working a treat.

                              Working volume is 570mm diameter by 1150mm tall.

                              20190729_200805_Small.jpg

                              Here's some footage of her in action...

                              https://youtu.be/nvOLMP2IJIU

                              The YouTube playlist for the build so far is here:

                              https://www.youtube.com/playlist?list=PLWjZVEdMv1BY82izahK45qKh-hp3NFkix

                              My channel is www.YouTube.com/CNCModellerUK

                              I'm hoping to come to TCT so will drop by the stall. If you want some better pictures just let me know!

                              Cheers
                              Barry M

                              Polar Duet3 Mini + 1HCL
                              https://youtube.com/playlist?list=PLWjZVEdMv1BY82izahK45qKh-hp3NFkix
                              Wanhao D4S: Duet2
                              https://forum.duet3d.com/post/296755
                              K40 Laser, Duet2
                              https://forum.duet3d.com/post/312082
                              Wanhao D5S
                              https://www.youtube.com/CNCModellerUK

                              1 Reply Last reply Reply Quote 3
                              • dc42undefined
                                dc42 administrators
                                last edited by dc42

                                I didn't know we had anyone using a polar printer seriously! The Polar kinematics support is probably the least debugged of any. I wrote it without having a printer to test it on. Let me know (after TCT) if you find any issues with it.

                                PS - it looks like you can do some very tall prints!

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                CNCModellerundefined 1 Reply Last reply Reply Quote 0
                                • CNCModellerundefined
                                  CNCModeller @dc42
                                  last edited by CNCModeller

                                  @dc42 said in Novel/Unusual/Large printer videos wanted:

                                  I didn't know we had anyone using a polar printer seriously!

                                  If all goes well with this prototype I'm hoping to end up with a farm of these and so far it's been straightforward all things considered.

                                  Let me know (after TCT) if you find any issues with it.

                                  Only thing so far is it doesn't seem to be limiting rotational speed near the centre of the bed but that might be me setting it up wrong. Will be in touch once I've got a little more experience.

                                  PS - it looks like you can do some very tall prints!

                                  Hopefully so, the first cheap bed bearing failed at about 1500 revolutions so the tallest height I've achieved in testing is only 300mm tall. My laser jig tool suggests that she should be good to print to about 1150mm but only a successful test print will confirm it.

                                  I'll be in touch after TCT.

                                  All the best
                                  Barry M

                                  Polar Duet3 Mini + 1HCL
                                  https://youtube.com/playlist?list=PLWjZVEdMv1BY82izahK45qKh-hp3NFkix
                                  Wanhao D4S: Duet2
                                  https://forum.duet3d.com/post/296755
                                  K40 Laser, Duet2
                                  https://forum.duet3d.com/post/312082
                                  Wanhao D5S
                                  https://www.youtube.com/CNCModellerUK

                                  1 Reply Last reply Reply Quote 0
                                  • mrehorstdmdundefined
                                    mrehorstdmd
                                    last edited by

                                    Some video of The Spice Must Flow sand table:

                                    https://vimeo.com/361952669

                                    https://vimeo.com/361953455

                                    https://vimeo.com/361955435

                                    https://drmrehorst.blogspot.com/

                                    DocTruckerundefined 1 Reply Last reply Reply Quote 0
                                    • Danalundefined
                                      Danal
                                      last edited by

                                      Is a 1.5 meter tall, 600mm dia bed, delta worthy? I can get some pics. And I won't have hurt feelings if you already have enough large deltas, there are some really cool printers up above in this thread.

                                      Delta / Kossel printer fanatic

                                      1 Reply Last reply Reply Quote 0
                                      • droftartsundefined
                                        droftarts administrators
                                        last edited by

                                        @Danal Thanks for the offer, I finished off the video for TCT a couple of days ago, and hopefully it's been running on the stand today, and for the next couple of days (I'll see when I go on Thursday). We did have quite a few delta printer videos already! I'll ask @T3P3Tony if we can post it on youtube or somewhere for people to see. Might yet need more videos if we decide to jazz up the website!

                                        Ian

                                        Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                        1 Reply Last reply Reply Quote 0
                                        • Vinculumundefined
                                          Vinculum
                                          last edited by

                                          Sorry I just saw this post. We are running 4 completely machines with a 900x1200x1500 build volume. Maybe next time. 😉

                                          1 Reply Last reply Reply Quote 0
                                          • DocTruckerundefined
                                            DocTrucker @mrehorstdmd
                                            last edited by

                                            @mrehorstdmd said in Novel/Unusual/Large printer videos wanted:

                                            ...The Spice Must Flow...

                                            Looking forward to next year's film? Lynch's effort was entertaining but not a patch on the books and the voice module things were a terrible idea!

                                            Running 3 P3Steel with Duet 2. Duet 3 on the shelf looking for a suitable machine. One first generation Duet in a Logo/Turtle style robot!

                                            1 Reply Last reply Reply Quote 0
                                            • o_lampeundefined o_lampe referenced this topic
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA