Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    No output from G32 on DSF 1.2.4 / DWC 2.07

    Scheduled Pinned Locked Moved
    Duet Web Control
    14
    64
    2.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kraegarundefined
      kraegar
      last edited by

      Tried in chrome just to verify (I usually use Firefox)

      33c932c4-a315-4b0e-b521-f69b4ccc57ac-image.png

      Co-Creator of the RailcoreII CoreXY printer
      https://www.thingiverse.com/thing:2407174

      1 Reply Last reply Reply Quote 0
      • Danalundefined
        Danal
        last edited by

        What is in your bed.g?

        Delta / Kossel printer fanatic

        mvieleersundefined 1 Reply Last reply Reply Quote 0
        • mvieleersundefined
          mvieleers @Danal
          last edited by

          @Danal
          ; bed.g
          ; called to perform automatic bed compensation via G32
          ;
          ; generated by RepRapFirmware Configuration Tool v2.1.8 on Thu Jan 23 2020 14:06:49 GMT+0100 (Midden-Europese standaardtijd)

          M561 ; clear any existing bed transform
          G1 Z5 H2 ; move nozzle up
          ;4-point bed levelling
          G30 P0 X15 Y45 Z-99999
          G30 P1 X15 Y275 Z-99999
          G30 P2 X275 Y275 Z-99999
          G30 P3 X275 Y45 Z-99999 S3
          G1 X0 Y0 F5000 ; move the head to the corner (optional)

          1 Reply Last reply Reply Quote 0
          • Danalundefined
            Danal
            last edited by

            Hmmm... I'm really stumped. I don't see any differences that would make a difference, and I'm getting it consistently.

            Delta / Kossel printer fanatic

            1 Reply Last reply Reply Quote 0
            • Danalundefined
              Danal
              last edited by

              SSH into your Pi, and try the following (while you run a G32):

              • sudo journalctl -fu duetcontrolserver

              If that doesn't show anything relevant, then:

              • sudo journalctl -fu duetwebserver

              There will (should) be a lot more output on the webserver, and again, it is up to our eyeballs to see if anything is relevant.

              Delta / Kossel printer fanatic

              mvieleersundefined 1 Reply Last reply Reply Quote 0
              • chas2706undefined
                chas2706
                last edited by

                Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                1 Reply Last reply Reply Quote 0
                • chas2706undefined
                  chas2706
                  last edited by

                  @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                  sudo journalctl -fu duetcontrolserver

                  This is my output from the above command:

                  Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file Leadscrew_Levelling.g on channel HTTP
                  Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file bed.g on channel HTTP
                  Feb 17 10:50:26 Duet3 DuetControlServer[345]: [info] Executing nested macro file homeall.g on channel HTTP
                  Feb 17 10:50:35 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                  Feb 17 10:50:52 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                  Feb 17 10:50:52 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                  Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                  Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file homeall.g
                  Feb 17 10:51:02 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                  Feb 17 10:51:13 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                  Feb 17 10:51:13 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                  Feb 17 10:51:26 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                  Feb 17 10:51:30 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file deployprobe.g not found
                  Feb 17 10:51:38 Duet3 DuetControlServer[345]: [info] HTTP: Optional macro file retractprobe.g not found
                  Feb 17 10:51:38 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file bed.g
                  Feb 17 10:51:39 Duet3 DuetControlServer[345]: [info] HTTP: Finished macro file Leadscrew_Levelling.g

                  and with sudo lournalctl -fu duetwebserver I get:

                  Feb 17 10:54:24 Duet3 DuetWebServer[463]: [DoCode] Executing code 'M98 P"0:/macros/Bed Levelling/Leadscrew_Levelling.g"'
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 69796.3473ms
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
                  Feb 17 10:55:33 Duet3 DuetWebServer[463]: Request finished in 69805.2756ms 200 text/plain; charset=utf-8

                  With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                  1 Reply Last reply Reply Quote 0
                  • oliofundefined
                    oliof
                    last edited by

                    @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                    With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                    That is due to the -f switch which means follow and waits for new stuff to be written to the journal. Not returning to the command prompt without hitting Ctrl-C is normal in this case.

                    <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                    1 Reply Last reply Reply Quote 0
                    • chas2706undefined
                      chas2706
                      last edited by

                      @oliof said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                      With both examples I notice the Pi does not return to "pi@Duet3:~ $ " is this something to do with the problem?

                      That is due to the -f switch which means follow and waits for new stuff to be written to the journal. Not returning to the command prompt without hitting Ctrl-C is normal in this case.

                      Ok thanks I see.
                      I don't know what the problem is then. I just get no output from the console at all.

                      1 Reply Last reply Reply Quote 0
                      • chas2706undefined
                        chas2706
                        last edited by

                        @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                        Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                        @dc42 Do you have any suggestions.
                        Also I noticed that when I enter any command in the console it does not work first time I have to enter twice! I am running RRF3.0.2_RC1 DWC2.0.7 DSF1.2.4.0 on Duet 3 board with SBC.

                        dc42undefined 1 Reply Last reply Reply Quote 0
                        • Danalundefined
                          Danal
                          last edited by

                          Yeah, I don't see anything in those logs that looks wrong.

                          I am well and truly stumped. The "must send twice" is equally weird.

                          Delta / Kossel printer fanatic

                          1 Reply Last reply Reply Quote 0
                          • chas2706undefined
                            chas2706
                            last edited by

                            @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                            Yeah, I don't see anything in those logs that looks wrong.

                            Yes it is both weird and annoying.
                            The bed levelling must be working because my prints are still good but its not right that you get no feedback.
                            Do you think that the two issues may be linked?
                            i.e. there's no bed deviation result because it was only reported once?

                            1 Reply Last reply Reply Quote 0
                            • dc42undefined
                              dc42 administrators @chas2706
                              last edited by

                              @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                              @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                              Hi, I mentioned in another post that since upgrading to RRF3.01_RC1 I too do not get any output from G32. I have Duet3 with raspberry pi.

                              @dc42 Do you have any suggestions.
                              Also I noticed that when I enter any command in the console it does not work first time I have to enter twice! I am running RRF3.0.2_RC1 DWC2.0.7 DSF1.2.4.0 on Duet 3 board with SBC.

                              One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                              Duet WiFi hardware designer and firmware engineer
                              Please do not ask me for Duet support via PM or email, use the forum
                              http://www.escher3d.com, https://miscsolutions.wordpress.com

                              1 Reply Last reply Reply Quote 0
                              • chas2706undefined
                                chas2706
                                last edited by

                                @dc42 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                                dc42 How do I roll back to Duet Software Framework 1.2.3.0 so I can go back to RRF3.0.1_beta2 and DWC2.06 because it was definitely working on that firmware setup.

                                Danalundefined 1 Reply Last reply Reply Quote 0
                                • richardmckennaundefined
                                  richardmckenna
                                  last edited by

                                  I’m not seeing any output from G32 either.

                                  Duet3+Pi 3B+
                                  Duet Web Control: 2.0.7
                                  Board: Duet 3 MB6HC (MB6HC)
                                  DSF Version: 1.2.4.0
                                  Firmware: RepRapFirmware for Duet 3 MB6HC v0.6 or 1.0 3.0 (2020-01-03b3)

                                  1 Reply Last reply Reply Quote 0
                                  • Danalundefined
                                    Danal @chas2706
                                    last edited by

                                    @chas2706 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                    @dc42 said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                    One for @chrishamm I think, because in standalone mode I don't see any of these issues, and neither have I seen any reports of them. So I suspect it is a DSF issue, or a DSF/RRF interaction.

                                    dc42 How do I roll back to Duet Software Framework 1.2.3.0 so I can go back to RRF3.0.1_beta2 and DWC2.06 because it was definitely working on that firmware setup.

                                    sudo apt-get install duetsoftwareframework=1.2.3.0

                                    Delta / Kossel printer fanatic

                                    1 Reply Last reply Reply Quote 0
                                    • chas2706undefined
                                      chas2706
                                      last edited by

                                      @Danal said in No output from G32 on DSF 1.2.4 / DWC 2.07:

                                      sudo apt-get install duetsoftwareframework=1.2.3.0

                                      Thanks for that.

                                      mvieleersundefined 1 Reply Last reply Reply Quote 0
                                      • mvieleersundefined
                                        mvieleers @Danal
                                        last edited by

                                        @Danal Just to be sure: this is my bed.g logs for completeness. Don't believe there's much to go on in there. (by the way, I had upgraded to 3.01-RC2 before.)
                                        duetcontrolserver:
                                        Feb 18 20:30:45 duet3 DuetControlServer[352]: [info] Executing nested macro file bed.g on channel HTTP
                                        Feb 18 20:30:46 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:30:53 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:30:53 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:30:54 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:30:54 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:01 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:01 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:02 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
                                        Feb 18 20:31:04 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:11 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:11 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:12 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:12 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:19 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:19 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:20 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
                                        Feb 18 20:31:23 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:30 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:30 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:31 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:31 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:38 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:38 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:39 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
                                        Feb 18 20:31:42 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:49 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:49 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:50 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:50 duet3 DuetControlServer[352]: [info] Executing nested macro file deployprobe.g on channel HTTP
                                        Feb 18 20:31:57 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file deployprobe.g
                                        Feb 18 20:31:57 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished intermediate macro file retractprobe.g
                                        Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] Executing nested macro file retractprobe.g on channel HTTP
                                        Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file retractprobe.g
                                        Feb 18 20:31:58 duet3 DuetControlServer[352]: [info] HTTP: Finished macro file bed.g

                                        duetwebserver:
                                        Feb 18 20:30:44 duet3 DuetWebServer[463]: info: DuetWebServer.Controllers.MachineController[0]
                                        Feb 18 20:30:44 duet3 DuetWebServer[463]: [DoCode] Executing code 'G32'
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 73655.5472ms
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
                                        Feb 18 20:31:58 duet3 DuetWebServer[463]: Request finished in 73656.4125ms 200 text/plain; charset=utf-8
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: Request starting HTTP/1.1 POST http://duet3.local/machine/code text/plain;charset=UTF-8 3
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Cors.Infrastructure.CorsService[4]
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: CORS policy execution successful.
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: Executing endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[3]
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: Route matched with {action = "DoCode", controller = "Machine"}. Executing controller action with signature System.Threading.Tasks.Task`1[Microsoft.AspNetCore.Mvc.IActionResult] DoCode() on controller DuetWebServer.Controllers.MachineController (DuetWebServer).
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: info: DuetWebServer.Controllers.MachineController[0]
                                        Feb 18 20:33:05 duet3 DuetWebServer[463]: [DoCode] Executing code 'G32'
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ContentResultExecutor[1]
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: Executing ContentResult with HTTP Response ContentType of text/plain; charset=utf-8
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: Executed action DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer) in 73870.6134ms
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: Executed endpoint 'DuetWebServer.Controllers.MachineController.DoCode (DuetWebServer)'
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
                                        Feb 18 20:34:19 duet3 DuetWebServer[463]: Request finished in 73872.5775ms 200 text/plain; charset=utf-8

                                        1 Reply Last reply Reply Quote 0
                                        • mvieleersundefined
                                          mvieleers @chas2706
                                          last edited by

                                          @chas2706 Please note, to make this work, you cannot be on a release of Reprapfirmware that requires DSF 1.2.4.

                                          1 Reply Last reply Reply Quote 0
                                          • gtj0undefined
                                            gtj0
                                            last edited by

                                            There are issues with the latest DSF and getting responses sent to the correct (or any) location. For instance, if I run G32 in one instance of the UI the response used to show up on all instances connected but now it seems to show up only on the one that issued the command (but not always even there).

                                            I started looking in the source for the issue to see if I can fix it myself but haven't really had time to dig into it as deep seems to be needed.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA