What firmware version are you using?
-
Just curious.
-
@Phaedrux
I have 2 printers. One is running 3.2 (as I voted) and the other is running 2.05 -
@garyd9 said in What firmware version are you using?:
@Phaedrux
I have 2 printers. One is running 3.2 (as I voted) and the other is running 2.05My setup exactly.
-
My boards are...
- v3.2.0 - Three Duet 2 WiFi/Duex 5 combos
- v3.2.0 - Two Duet 3 Mini 5 and One Duet 3 MB6HC
Frederick
-
@Phaedrux said in What firmware version are you using?:
Just curious.
Maybe combine it with the question on which hardware? Maybe get´s too complex...
RRF3.2 on a duet2ethernet1.0.4
-
Upgrade level among the people that answer is very high. I wonder how well it represents the entire Duet user base.
-
@zapta said in What firmware version are you using?:
Upgrade level among the people that answer is very high. I wonder how well it represents the entire Duet user base.
Yep - could be some statistic magic: The "have the latest & greatest firmware" people maybe just coincidally are the same ones that seem to hang out in the forum and read the latest blog-entries
-
Kossel XL+ Duet2 WiFi Firmare 3.2
CNC Test Bed 12 steppers Duet3 Firmware 3.2 RPi SBC
CNC Test Bed 12 steppers Duet3 spare/development Firmware 3.3 RPi SBC or standalone -
Im using 2.05 on all my duet wifi and 3.2 on my duet 3 board
-
Waiting for 3.3 beta with new DSF beta for my Duet3 and running 3.2 as voted. I think many of us are waiting for that...
Running 2.05 on my Duet2WiFi. -
3.2 with Duet 2 Wifi and Duet 5 as extension. Railcore II 300 ZL configuration.
-
2.0.5 on the CR-IDEX,
3.2.2 on the V-Core Pro,
3.2 on the Newmerod,
3.2.2 on the miniMIR,
3.2beta on the Colinear Tripteron.(the latter three are incomplete at the moment).
-
On my Ender 5 with Duet Wifi on 3.2
-
How do I change my vote to undo 2.5 and check 3.2 since I updated my SeeMeCNC Rostock Max V3.2 yesterday?
-
My ender5 was down for a long time since the head got encased in plastic. I bought some new hotends and finally got it running again. Haven't had time to upgrade to v3 yet. I just want to get printing first.
-
2.05 v-Core Pro (Duet2)
3.2 v-Cast IDEX (Duet3) - Work in progress
voted 3.2 -
Want to switch to RRP 3.1 for my delta and Railcore II just haven't got around to it..a little weary.
-
at the moment i´m really happy with the new 3.3beta1. Especially the new Function to Tune Heaters connected to Toolboards
-
@Frederik said in What firmware version are you using?:
at the moment i´m really happy with the new 3.3beta1. Especially the new Function to Tune Heaters connected to Toolboards
You're a brave man - I guess it comes from having a great name.
Frederick
-
