Bltouch not deploy sometines it does
-
I have installed a cartesion i3 style printer at home. It s a duet3, SBC mode, V2.5.3. Bltouch V3.0
Conections were done following the dcoumented instructions here.
Bl touch responds perfectly to M401 and M402 commands every time
I have attach my config, and homing filesThe problem Im seeing is that the probe is not always deployed, it is somehow a random problem so far (cant detect a pattern at the moment)
Doing a homeall homes X, Y and the it performs the Z homeing routine but the probe is not deployed. Sometimes is deployed like with a delay of 5 seconds. Sometime I have to stop it before nozzle crashed the bed.
G30 command sometimes works, sometimes doesnt deploy the probe.
deployprobe.g and retractprobe.g are in place and with correct commandsIm going crazy with this jajajaja
Thanks in advance for the help
config.g config-override.g deployprobe.g homeall.g homex.g homey.g homez.g mesh.g retractprobe.g -
@Tinchus said in Bltouch not deploy sometines it does:
I had exactly the same issue, that was driving me crazy....
check the pin
"Try loosening or tightening the set screw slightly to adjust the trigger sensitivity."
The description how to set up the srew is in the manual
In the end a quarter turn had reliably solved the problem.