M425 Backlash compensation happens too slow even with S1
-
I have a machine with 1Z cantilever bed. I'm using a Stepper Online 10:1 precision planetary gearmotor for Z.
I'm measuring a backlash of 0.044mm. (which is about 80% of the datasheet max backlash). 22% of a standard 0.2mm layer height
With a M425 Z0.044 S1
There's too much lag in compensating the backlash to make bed mesh really useful.
Ideally i'd like it taken up as fast as the stepper motor driver can take the steps on the reversal. Can we have an option for that? Like -S0 says do the backlash comp as soon as is possible?
