Firmware wishlist and priorities for Duet WiFi and Duet Ethernet
-
@dc42 Implement G29 T1 tag to list the height table, this makes it possible to communicate with Bed Level Visualizer
see https://plugins.octoprint.org/plugins/bedlevelvisualizer/ for info.All Octoprint users will love this I guess.
Low priority since this exists in the DUET GUI as a workaround.
-
13
Didn't I read somewhere that it is already implemented or was it a wishlist too? (firmware not Deckingmans script) -
@dc42 This is already possible, I have the following in my end gcode -
;Play beep beep beep to show print ended.
M300 P500 S5000
G4 P400
M300 P500 S5000
G4 P400
M300 P500 S5000
G4 P400
M300 P500 S5000 -
@mitchd If you're looking for a little jingle when a print is finished and not just a beep, try this one:
; Play a triumphant tune to celebrate a successful print. M400 ; Clear queue before jingle G4 S1 M300 P250 S750 G4 P251 M300 P200 S1250 G4 P201 M300 P250 S750 G4 P251 M300 P200 S1250 G4 P201 M300 P250 S2500 G4 P251 M300 P150 S2000 G4 P151 M300 P150 S2500 G4 P151 M300 P350 S3700 G4 P351 M400 -
That is too cool
@phaedrux said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:
; Play a triumphant tune to celebrate a successful print.
M400 ; Clear queue before jingle
G4 S1
M300 P250 S750
G4 P251
M300 P200 S1250
G4 P201
M300 P250 S750
G4 P251
M300 P200 S1250
G4 P201
M300 P250 S2500
G4 P251
M300 P150 S2000
G4 P151
M300 P150 S2500
G4 P151
M300 P350 S3700
G4 P351
M400 -
@jnolan72 If you like that one I have another one for printer start up and another for right before the print starts.
I've tried to program more complex tunes but the more commands you send the more likely the system is to miss a tone or stutter. The buffer can only handle so much I guess. Hence having to issue an M400 before and after. This is more noticeable at printer startup than it is say before or after a print.
; ; Startup Tune. Placed at the end of config.g ; M400 G4 S2 M300 P200 S2000 G4 P201 M300 P200 S2250 G4 P201 M300 P200 S2000 G4 P201 M300 P200 S2855 G4 P201 M300 P200 S2500 G4 P201 M300 P200 S2200 G4 P201 M300 P200 S2500 G4 P201 M300 P200 S2900 G4 P201 M300 P300 S3500 G4 S1 M400; ; Lucky tune to start print off on the right foot. Placed in slicer start g-code. ; M300 P200 S1000 G4 P201 M300 P200 S1250 G4 P201 M300 P200 S1100 G4 P201 M300 P200 S2000 G4 P201 M300 P200 S1500 G4 P201 M300 P200 S1000 G4 P201 M300 P200 S1300 G4 P201 M300 P200 S1000 G4 P201 M300 P300 S1500 G4 S1 M400 -
1,4,5,16,17
-
Thanks guys for the beeps and tunes! My old Creatbot beeps and I was missing that on this new build.
-
@coffee Last one... Inspired by my Roomba
; Charge.g ; ; Duh nuh nun nah nah naah Charge! ; M400 G4 S1 M300 P295 S520 G4 P295 M300 P250 S650 G4 P250 M300 P250 S750 G4 P250 M300 P285 S850 G4 P450 M300 P285 S850 G4 P285 M300 P625 S1100 G4 S1 M400 -
If this is still relevant, these are my picks:
1
6
7
9
20Thanks!
-
@phaedrux THANKS !!!
-
@SnowCrash did you follow all the recent Firmware releases?
As far as I can tall, all the picks you listed are already implemented to some degree.@dc42 as this threads continues to grow and grow, I would recommend closing it, and opening a fresh one after 2.0 and 1.21.1 is released.
-
@resam said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:
@SnowCrash did you follow all the recent Firmware releases?
As far as I can tall, all the picks you listed are already implemented to some degree.Thanks @resam! That's great news
To your question, I haven't been following the recent firmware releases for the simple reason that I only got my DuetWifi a short while ago and it already had the latest firmware already installed.
However, I'm definitely planning on doing so in the future.
-
1 & 2, 6, 8, 3
-
@kenblu24 1, 6, 8, and 3 are already done. Please read the release notes of recent firmware updates.
2 will probably never make it due to memory & cpu restrictions. -
@resam darn
#2 would have been awesome to have. Sorry, haven't been keeping up with the updates. -
Can we please add to the wishlist?
-Improved motion planning as of:
https://forum.duet3d.com/topic/4802/6th-order-jerk-controlled-motion-planning
I really hope it will be available for deltas too...-Print resume from a given layer (Maybe the user could set the printhead to the appropriate layer and hit resume) ... From that point the head would go up, heat, (prime?) and continue the print.
I know it's possible threw editing the resume file, but this would make it so much easier...Thanks!
-
It would be nice if the wifi would create it's own network if one isn't detected when booted up. And have the name of the network be the name of the machine.
-
@bendiesel said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:
It would be nice if the wifi would create it's own network if one isn't detected when booted up. And have the name of the network be the name of the machine.
Something like that could be used for initial configuration as well much like other wifi devices. It creates its own access point which you connect to, you enter the wifi network information and reboot. Then continue with configuration afterwards. No need to connect to a PC first via usb or edit files on an SD card.
And having it fall back to the same access point mode if the configured network is no longer present would be helpful.
-
Some home automation devices use the same logic, some of them even have a dedicated button which puts them into ap mode, where you can configure the network.
