Topics created by anetA8Duet

You can try using different values for X and Y. The weight of the bed (and any number of other differences between the X and Y axis) can require different acceleration and jerk values. Typically you can get away with more aggressive values on X than you can on Y.

@anetA8Duet Hey there, I just got this set up on my Rostock Max v3.2 with the 2 into 1 style extruder. It isn't perfect because I haven't gotten the jamming issues (oddly shaped/oversized tips where the filament was melted don't fit in the bowden path well) fixed yet but I can link them for you if you want. It should at least give you a place to start.

@plasticmetal My first hand experience is limited to old Realizer, and MCP/MTT/Renishaw machines up to 2013ish. First place I worked had earlier EOS systems but I was running the DTM/3D Systems plastic machines there.

The field is, or at least was progressing very quickly. Left metals machines around 2014.

Alrighty i'll give that a try when i get home tonight and keep you updated. thank you for your time 🙂