Topics created by btmclain

@btmclain I see you have standstill current at 0% (M917 X0), have you tried commenting out this line, or increasing the standstill current value?

on my system when I add the M917 X0 I also get this clunk. Removing it and I have no clunk when tuning.

@btmclain to do the tuning it needs to be in closed loop.

Generally you home the axis in open loop, move it to a "safe" location (not crashing the machine), set it to closed loop, then do the calibration.

I suggest you read the tuning documentation here

@blair yes this new functionality applies to axes driven by expansion motors too in RRF 3.6.

@dc42 I should clarify that when we use the move.axes[N].machinePosition in Gcode it works well. When using the rr_model with HTTP, it does not seem to have the same functionality.

@alankilian i know this topic is old but ive been looking into the same thing im trying to grab the macros from the duet but ive had no joy so far using python

@mintytrebor

Thanks for the reply. I will play around with it!

@theolodian

No problem, thank you!