@t3p3tony
m122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.4.0beta5 (2021-10-12 13:53:56) running on Duet 3 MB6HC v1.01 or later (SBC mode)
Board ID: 08DJM-9P63L-DJ3S0-7J1D6-3SD6S-1UJV8
Used output buffers: 1 of 40 (12 max)
=== RTOS ===
Static ram: 151104
Dynamic ram: 65108 of which 0 recycled
Never used RAM 134460, free system stack 219 words
Tasks: SBC(ready,0.4%,518) HEAT(notifyWait,0.1%,361) Move(notifyWait,0.0%,351) CanReceiv(notifyWait,0.0%,944) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,333) TMC(notifyWait,7.1%,92) MAIN(running,41.2%,1241) IDLE(ready,51.2%,30), total 100.0%
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 00:00:30 ago, cause: power up
Last software reset details not available
Error status: 0x00
Step timer max interval 132
MCU temperature: min 12.4, current 21.8, max 21.8
Supply voltage: min 24.1, current 24.2, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.1, current 12.2, max 12.2, under voltage events: 0
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Driver 0: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Driver 1: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Driver 2: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Driver 3: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Driver 4: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Driver 5: pos 0, standstill, SG min/max 0/0, reads 41983, writes 14 timeouts 0
Date/time: 2021-11-03 20:39:44
Slowest loop: 0.97ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== CAN ===
Messages queued 168, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 48), ts 154/0/0
Tx timeouts 0,0,153,13,0,0 last cancelled message type 30 dest 127
=== SBC interface ===
State: 4, failed transfers: 0, checksum errors: 649
Last transfer: 2ms ago
RX/TX seq numbers: 16350/750
SPI underruns 2, overruns 2
Disconnects: 0, timeouts: 0, IAP RAM available 0x2b7dc
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.4-b5
Code buffer space: 4096
Configured SPI speed: 8000000Hz
Full transfers per second: 37.18, max wait times: 2187.4ms/29.1ms
Codes per second: 0.01
Maximum length of RX/TX data transfers: 2868/560
