Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. Eduma
    • Profile
    • Following 0
    • Followers 0
    • Topics 15
    • Posts 54
    • Best 2
    • Controversial 0
    • Groups 0

    Eduma

    @Eduma

    2
    Reputation
    1
    Profile views
    54
    Posts
    0
    Followers
    0
    Following
    Joined Last Online

    Eduma Unfollow Follow

    Best posts made by Eduma

    • RE: Magnetic Filament Monitor Sensitivity Increasing

      @T3P3Tony I'm not feeling temperature difference. Once my current print is complete I'll pull the sensor apart and ensure everything is correct.

      Am I correct that there is not way to see filament monitor readings without running a print?

      @fractalengineer I saw your post yesterday and the design certainly caught my eye. If the filament monitor doesn't pan out for me I was thinking about doing something similar with an E3D or bondtech hob. Do you think your seeing slip on your printed wheel? Or do you think print variation on your encoder disk could cause distance between pulses to inconsistent?

      posted in Filament Monitor
      Edumaundefined
      Eduma
    • RE: BL Touch Self Test Speratic

      @I_Jedi

      I found that the 5V signal to the BL touch was not instance on, but instead "slowly" ramping up to 5V. The BL touch was not seeing 5V fast enough and going in to error. I added a time relay to create a slight delay before powering the bl touch and it remedied my situation.

      posted in General Discussion
      Edumaundefined
      Eduma

    Latest posts made by Eduma

    • RE: Filament Monitor Flagging When Not Printing

      @phaedrux

      I had thought to do that as well. Just seemed like odd behavior.

      I expected the s1 to signify only while printing. If there are retracts and moves it would make no sense to check it on power up.

      posted in Filament Monitor
      Edumaundefined
      Eduma
    • RE: VIN Under-voltage Threshold

      @dc42

      I am not using the M911, due to the bed adhesions issues that will arise as thing cool and the challenges associated with restarting your print. But that may be a viable option to use as an alert. Wasn't sure if there was some other command I was overlooking.

      I'll play around with that. Thank you for the quick response.

      posted in Using Duet Controllers
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      @Phaedrux

      I tried to trigger E4-E6 on a separate Duex2 in a different machine and it will not trigger. I suspect that the firmware is not looking at the input since there is no stepper drive at these postions.

      Am I correct that in firmware 2.x you can not remap a home sensor to a different axis?

      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma
    • RE: BL Touch Self Test Speratic

      @fcwilt @I_Jedi @oozeBot

      I had found that after machine power up the bl touch would immediately run its self test and begin to flash. If I disconnected power to the bl touch then reconnect it would run its self test and complete the test without issue. This worked 100% of the time. This lead me to connect a scope my cheap 24v to 5V power converter and found that the 5V was a gradual increase instead of an instant on.

      I tried utilizing the reset command but did not have consistent luck. I believe that reset is only intended for probe up/down failures, not power alarms. Would be great if BL touch offered an up/down/error outputs. Would also be nice if you could actual see the blue indicator light.

      posted in General Discussion
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      @Phaedrux

      I will do some additional testing with the same duex2 and advise. I will then reach out to filastruder if needed for a return.

      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma
    • RE: BL Touch Self Test Speratic

      @I_Jedi

      I found that the 5V signal to the BL touch was not instance on, but instead "slowly" ramping up to 5V. The BL touch was not seeing 5V fast enough and going in to error. I added a time relay to create a slight delay before powering the bl touch and it remedied my situation.

      posted in General Discussion
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      @Phaedrux

      Sorry for the delay in responding.

      The indicator lights change as expected when triggered. I measured the voltage in each trigger circuit and they measure as expected.

      The Duex is connected to the Duet with the supplied 50 pin ribbon cable.

      As mentioned I installed a Duex 5 without making changes and everything worked as expected.

      M122
      === Diagnostics ===
      RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05.1 running on Duet WiFi 1.02 or later + DueX2
      Board ID: 08DLM-996RU-N85T0-6J9FL-3SD6T-1SSVP
      Used output buffers: 1 of 24 (8 max)
      === RTOS ===
      Static ram: 25712
      Dynamic ram: 93832 of which 232 recycled
      Exception stack ram used: 312
      Never used ram: 10984
      Tasks: NETWORK(ready,628) HEAT(blocked,1256) DUEX(suspended,160) MAIN(running,3736) IDLE(ready,160)
      Owned mutexes:
      === Platform ===
      Last reset 00:02:49 ago, cause: power up
      Last software reset time unknown, reason: User, spinning module GCodes, available RAM 10984 bytes (slot 3)
      Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
      Error status: 0
      Free file entries: 10
      SD card 0 detected, interface speed: 20.0MBytes/sec
      SD card longest block write time: 0.0ms, max retries 0
      MCU temperature: min 31.5, current 37.6, max 37.8
      Supply voltage: min 24.1, current 24.2, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
      Driver 0: standstill, SG min/max not available
      Driver 1: standstill, SG min/max not available
      Driver 2: standstill, SG min/max not available
      Driver 3: standstill, SG min/max not available
      Driver 4: standstill, SG min/max not available
      Driver 5: standstill, SG min/max not available
      Driver 6: standstill, SG min/max not available
      Date/time: 2020-08-10 08:55:50
      Cache data hit count 510112386
      Slowest loop: 11.44ms; fastest: 0.07ms
      I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
      === Move ===
      Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
      Bed compensation in use: none, comp offset 0.000
      === DDARing ===
      Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
      === Heat ===
      Bed heaters = -1 -1 -1 -1, chamberHeaters = -1 -1
      === GCodes ===
      Segments left: 0
      Stack records: 2 allocated, 0 in use
      Movement lock held by null
      http is idle in state(s) 0
      telnet is idle in state(s) 0
      file is idle in state(s) 0
      serial is idle in state(s) 0
      aux is idle in state(s) 0
      daemon is idle in state(s) 0
      queue is idle in state(s) 0
      autopause is idle in state(s) 0
      Code queue is empty.
      === Network ===
      Slowest loop: 21.43ms; fastest: 0.00ms
      Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
      HTTP sessions: 1 of 8
      - WiFi -
      Network state is running
      WiFi module is providing access point
      Failed messages: pending 0, notready 0, noresp 0
      WiFi firmware version 1.23
      WiFi MAC address ee:fa:bc:5b:49:04
      WiFi Vcc 3.36, reset reason Turned on by main processor
      WiFi flash size 4194304, free heap 24840
      WiFi IP address 11.22.33.44
      Connected clients 1
      Socket states: 0 0 0 0 0 0 0 0
      

      config.g

      ;Configuration file for Duet WiFi 						
      ;Version	1	6/19/2020		
      ;__________________________________________________________________________________________				
      				
      ;__________DISABLE ALL FANS__________				
      M106 P0 I-1				
      M106 P1 I-1				
      M106 P2 I-1				
      M106 P3 I-1				
      M106 P4 I-1				
      M106 P5 I-1				
      M106 P6 I-1				
      M106 P7 I-1				
      				
      ;__________TURN OFF ALL FAN OUTPUTS__________				
      M42 P20 S0				
      M42 P21 S0				
      M42 P22 S0				
      M42 P23 S0				
      M42 P24 S0				
      M42 P25 S0				
      M42 P26 S0				
      M42 P27 S0				
      				
      ;__________DISABLE ALL HEATERS__________				
      M307 H0 A-1 C-1 D-1				
      M307 H1 A-1 C-1 D-1				
      M307 H2 A-1 C-1 D-1				
      M307 H3 A-1 C-1 D-1				
      M307 H4 A-1 C-1 D-1				
      M307 H5 A-1 C-1 D-1				
      M307 H6 A-1 C-1 D-1				
      M307 H7 A-1 C-1 D-1				
      				
      ;__________TURN OFF ALL HEATER OUTPUTS__________				
      M42 P0 S0				
      M42 P1 S0				
      M42 P2 S0				
      M42 P3 S0				
      M42 P4 S0				
      M42 P5 S0				
      M42 P6 S0				
      M42 P7 S0				
      				
      M42 P1 S1				;TURN WHITE LIGHT ON
      				
      ;__________General preferences__________				
      G90   				; Send absolute coordinates...
      M83   				; ...but relative extruder moves
      M555 P1 				; SET FIRMWARE COMPATABILITY TO REPRAP
      M669 K1 X-1:-1:0:0 Y-1:1:0:0 Z0:0:1:0 U0:0:0:1					;Select CoreXY mode
      				
      ;__________Network__________				
      M552 S0				;WIFI ON
      G4 S1				;WAIT 1 SECOND
      M552 S2				;ENABLE NETWORK AS HOST
      ;M552 S1                   				;ENABLE NETWORK AS CLIENT
      G4 S1				;WAIT 1 SECOND
      				
      ; __________Drives__________				
      M569 P0 S1				;Drive 0 goes forwards
      M569 P1 S1				;Drive 1 goes forwards
      M569 P2 S0				;Drive 2 goes backwards
      
      				
      M92 X80 Y80 Z414.4				;SET STEPS PER MM 16X MICRO STEPS
      M350 X16 Y16 Z16 I1				;SETP MICRO STEPPING
      				
      M566 X1000 Y1000 Z2000				;(jerk) Set maximum instantaneous speed changes (mm/min)
      M203 X18000 Y18000 Z6000				;Set maximum speeds (mm/min)
      M201 X1500 Y1500 Z1500				;Set max accelerations (mm/s^2)
      M906 X1600 Y1600 Z1600 I30				;Set motor currents (mA) and motor idle factor in per cent
      M84 S5				;Set idle timeout
      				
      ; __________Axis Limits__________				
      M208 X0 Y0 Z0 S1				;Set axis minima
      M208 X330 Y300 Z105 S0				;Set axis maxima
      				
      ; __________Endstops__________				
      M574 X2 Y2 Z2 S1				;Set active high endstops
      				
      ; __________Tools__________				
      M563 P0 S"TOOL 0" D0				;DEFINE TOOL 0
      G10 P0 X0 Y0 Z0				;SET TOOL 0 AXIS OFFSET
      M563 P1 S"TOOL 1" D1				;DEFINE TOOL 1
      G10 P1 X52 Y0 Z0				;SET TOOL 1 AXIS OFFSET
      					
      ;__________BED__________				
      M140 H-1				;DISABLE BED HEAT
      				
      ;__________ESTOP I/O__________				
      M581 E0 T0 S1 C0				;WHEN DRIVE 0 HOME SENSOR IF LOW EXECUTE E-STOP
      				
      ;__________DOOR I/O__________				
      M581 E1 T1 S1 C0				;WHEN DRIVE 6 HOME SENSOR IS LOW EXECUTE PAUSE
      M582 T1
      				
      ;__________EXHAUST CHECK__________				
      M581 E2 T2 S1 C0				;CHECK EXHAUST SWITCH AT ALL TIME IF OPEN RUNTRIGGER2.G
      M582 T2
      				
      ;__________ENABLE COLD EXTRUDE__________				
      M302 P1				;ALLOW COLD EXTRUDE
      				
      ;__________LOW LEVEL__________						
      				
      M581 E3 T5 S1 C0				;DEFINE TRIGGER 5 
      M581 E4 T6 S1 C0				;DEFINE TRIGGER 6
      
      
      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      bump

      I still have not figured out how to utilize the extra end stops on the Duex 2.

      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      Replaced the Duex 2 with a Duex 5 and it apears to now work correctly.

      Maybe some one with more knowledge of the firmware can confirm but i suspect that the Duex2 does not have the E4-E6 configured out of the box.

      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma
    • RE: Duex2 Enstops

      @fcwilt

      Yes i have a unique trigger file for each.

      posted in Duet Hardware and wiring
      Edumaundefined
      Eduma