Posts made by gruen

@Phaedrux
I used unofficila-3.3beta from 2021.02.01 and "upgrade" to RRF3.2. Now I have sometimes this freezes.

I have exactly the same issues after upgrade to RRF 3.2. The unofficial 3.3 Beta works.

I have SBC Duet3 MB6HC with toolboards 1LC at 3.1 or 3.2

After Reset - Homing all - Tool load - Tool unload - Homing all have I a X-offset off 5mm.

I can print without problems, also tool changes. Only after the 2nd homing have I the offset.

What can I do?

No answer?

Is ther finally a solution for this error?

config-override.g doesn't override anymore the M307 H1 B0 S1.00

I have now the exact same issue.

Yes, I'm use also Duet3 with SBC.

I have also this issue with T R1.

After resume:

Error: Attempting to extrude with no tool selected.

I'm waiting for RC7.

I'm back on RC5.

I have upgrade from a fresh raspberry image to RC6. Now I would print, upload works then
Failed to connect to duet3.
DCS is not startet.

Apr 05 12:29:59 Duet3 DuetControlServer[2388]: Duet Control Server v1.3.1
Apr 05 12:29:59 Duet3 DuetControlServer[2388]: Written by Christian Hammacher for Duet3D
Apr 05 12:29:59 Duet3 DuetControlServer[2388]: Licensed under the terms of the GNU Public License Version 3
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [info] Settings loaded
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [info] Environment initialized
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 05 12:30:00 Duet3 DuetControlServer[2388]: [error] Duet is not available
Apr 05 12:30:00 Duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 05 12:30:06 Duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 05 12:30:06 Duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 75.
Apr 05 12:30:06 Duet3 systemd[1]: Stopped Duet Control Server.
Apr 05 12:30:06 Duet3 systemd[1]: Started Duet Control Server.
Apr 05 12:30:06 Duet3 DuetControlServer[2405]: Duet Control Server v1.3.1
Apr 05 12:30:06 Duet3 DuetControlServer[2405]: Written by Christian Hammacher for Duet3D
Apr 05 12:30:06 Duet3 DuetControlServer[2405]: Licensed under the terms of the GNU Public License Version 3
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [info] Settings loaded
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [info] Environment initialized
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 05 12:30:07 Duet3 DuetControlServer[2405]: [error] Duet is not available
Apr 05 12:30:07 Duet3 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 05 12:30:13 Duet3 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 05 12:30:13 Duet3 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 76.
Apr 05 12:30:13 Duet3 systemd[1]: Stopped Duet Control Server.
Apr 05 12:30:13 Duet3 systemd[1]: Started Duet Control Server.
Apr 05 12:30:13 Duet3 DuetControlServer[2418]: Duet Control Server v1.3.1
Apr 05 12:30:13 Duet3 DuetControlServer[2418]: Written by Christian Hammacher for Duet3D
Apr 05 12:30:13 Duet3 DuetControlServer[2418]: Licensed under the terms of the GNU Public License Version 3

Power cycle doesn't work!

RC5 works for me, how can I downgrade?

@gtj0

here is the config.json

{
  "LogLevel": "info",
  "SocketDirectory": "/var/run/dsf",
  "SocketFile": "dcs.sock",
  "Backlog": 4,
  "SocketPollInterval": 2000,
  "BaseDirectory": "/opt/dsf/sd",
  "HostUpdateInterval": 4000,
  "MaxMessageAge": 60,
  "SpiDevice": "/dev/spidev0.0",
  "SpiFrequency": 8000000,
  "SpiTransferTimeout": 500,
  "MaxSpiRetries": 3,
  "SpiPollDelay": 25,
  "SpiPollDelaySimulating": 5,
  "GpioChipDevice": "/dev/gpiochip0",
  "TransferReadyPin": 25,
  "BufferedPrintCodes": 32,
  "BufferedMacroCodes": 16,
  "MaxBufferSpacePerChannel": 1536,
  "ModelUpdateInterval": 250,
  "MaxMachineModelLockTime": -1,
  "FileInfoReadBufferSize": 8192,
  "FileInfoReadLimitHeader": 12288,
  "FileInfoReadLimitFooter": 262144,
  "MaxLayerHeight": 0.9,
     
}

removed: "LayerHeightFilters"

-- Logs begin at Sat 2020-04-04 22:30:02 CEST, end at Sat 2020-04-04 22:30:59 CEST. --
Apr 04 22:30:05 Duet6 systemd[1]: Started Duet Control Server.
Apr 04 22:30:09 Duet6 DuetControlServer[335]: Duet Control Server v1.3.1
Apr 04 22:30:09 Duet6 DuetControlServer[335]: Written by Christian Hammacher for Duet3D
Apr 04 22:30:09 Duet6 DuetControlServer[335]: Licensed under the terms of the GNU Public License Version 3
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [info] Settings loaded
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [info] Environment initialized
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 04 22:30:12 Duet6 DuetControlServer[335]: [error] Duet is not available
Apr 04 22:30:12 Duet6 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 04 22:30:17 Duet6 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 04 22:30:17 Duet6 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 1.
Apr 04 22:30:17 Duet6 systemd[1]: Stopped Duet Control Server.
Apr 04 22:30:17 Duet6 systemd[1]: Started Duet Control Server.
Apr 04 22:30:18 Duet6 DuetControlServer[737]: Duet Control Server v1.3.1
Apr 04 22:30:18 Duet6 DuetControlServer[737]: Written by Christian Hammacher for Duet3D
Apr 04 22:30:18 Duet6 DuetControlServer[737]: Licensed under the terms of the GNU Public License Version 3
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [info] Settings loaded
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [info] Environment initialized
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 04 22:30:19 Duet6 DuetControlServer[737]: [error] Duet is not available
Apr 04 22:30:19 Duet6 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 04 22:30:25 Duet6 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 04 22:30:25 Duet6 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 2.
Apr 04 22:30:25 Duet6 systemd[1]: Stopped Duet Control Server.
Apr 04 22:30:25 Duet6 systemd[1]: Started Duet Control Server.
Apr 04 22:30:25 Duet6 DuetControlServer[1054]: Duet Control Server v1.3.1
Apr 04 22:30:25 Duet6 DuetControlServer[1054]: Written by Christian Hammacher for Duet3D
Apr 04 22:30:25 Duet6 DuetControlServer[1054]: Licensed under the terms of the GNU Public License Version 3
Apr 04 22:30:26 Duet6 DuetControlServer[1054]: [info] Settings loaded
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [info] Environment initialized
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 04 22:30:27 Duet6 DuetControlServer[1054]: [error] Duet is not available
Apr 04 22:30:27 Duet6 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 04 22:30:32 Duet6 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 04 22:30:32 Duet6 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 3.
Apr 04 22:30:32 Duet6 systemd[1]: Stopped Duet Control Server.
Apr 04 22:30:32 Duet6 systemd[1]: Started Duet Control Server.
Apr 04 22:30:32 Duet6 DuetControlServer[1227]: Duet Control Server v1.3.1
Apr 04 22:30:32 Duet6 DuetControlServer[1227]: Written by Christian Hammacher for Duet3D
Apr 04 22:30:32 Duet6 DuetControlServer[1227]: Licensed under the terms of the GNU Public License Version 3
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [info] Settings loaded
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [info] Environment initialized
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 04 22:30:34 Duet6 DuetControlServer[1227]: [error] Duet is not available
Apr 04 22:30:34 Duet6 systemd[1]: duetcontrolserver.service: Succeeded.
Apr 04 22:30:52 Duet6 systemd[1]: duetcontrolserver.service: Service RestartSec=5s expired, scheduling restart.
Apr 04 22:30:52 Duet6 systemd[1]: duetcontrolserver.service: Scheduled restart job, restart counter is at 4.
Apr 04 22:30:52 Duet6 systemd[1]: Stopped Duet Control Server.
Apr 04 22:30:52 Duet6 systemd[1]: Started Duet Control Server.
Apr 04 22:30:53 Duet6 DuetControlServer[1241]: Duet Control Server v1.3.1
Apr 04 22:30:53 Duet6 DuetControlServer[1241]: Written by Christian Hammacher for Duet3D
Apr 04 22:30:53 Duet6 DuetControlServer[1241]: Licensed under the terms of the GNU Public License Version 3
Apr 04 22:30:54 Duet6 DuetControlServer[1241]: [info] Settings loaded
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [info] Environment initialized
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [warn] Bad data checksum (expected 0x31c7, got 0xe55f)
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [warn] Restarting transfer because the number of maximum retries has been exceeded
Apr 04 22:30:55 Duet6 DuetControlServer[1241]: [error] Duet is not available
Apr 04 22:30:55 Duet6 systemd[1]: duetcontrolserver.service: Succeeded.

nothing works, power cycle doesn't help:

Duet Control Server v1.3.1
Written by Christian Hammacher for Duet3D
Licensed under the terms of the GNU Public License Version 3

[info] Settings loaded
[info] Environment initialized
[warn] Bad data checksum (expected 0xa23d, got 0x5ef8)
[warn] Bad data checksum (expected 0xa23d, got 0x5ef8)
[warn] Bad data checksum (expected 0xa23d, got 0x5ef8)
[warn] Restarting transfer because the number of maximum retries has been exceeded
[error] Duet is not available

for me work this to upgrade my sbc:

apt remove duetsoftwareframework duetcontrolserver duetsd duettools duetwebserver duetwebcontrol reprapfirmware

and install with

apt install duetsoftwareframework duetcontrolserver duetsd duettools duetwebserver duetwebcontrol reprapfirmware

I come from working RC5 on 6HC. After the update works nothing!

(

Oh, my error. M143 H2 S400 works. Thanks.

I use the workaround and set with M143 the maximum permitted temperature to 1200°C. After another M143 H2 400 stays the Temperature Chart at 1200°C.
Can I reset the upper limit?

With M143 workaround works the auto tune.

After successfull auto tune does M500 only write:

; config-override.g file generated in response to M500

; Heater model parameters
M307 H0 A C D S V B0
M307 H1 A C D S V B0
M307 H2 A C D S V B0
M307 H3 A C D S V B0
; Workplace coordinates

I need 400°C for print with PEI. I don't think this work with 20 Watt.