Topics created by hmmatos

@achrn said in Duet reboot when trying to heat bed:
110V and 220V beds

Sorry - for avoidance of confusion - they have the heaters, not the whole bed - it needs applying to a bed plate.

well is not perfect but I think it works

photo

@pipersw said in temperature variation (since update to 2.0.4):

I have fluctuation if I set PWM to 50% and 40W cartrige, but none if PWM set to 100%, but I have the warning hoverheat message.
So I set PWM to 100%.

Reducing the PWM percentage may stop the warning but it won't actually save you from what the warning actually warns about. In the case of a fail-on scenario, PWM has stopped working anyway.

well I put X0 Y0 Z0 in config.g and it solves the problem I still don't know where he gets that tool offset value
Thanks all for the help

Try

M550 PSteam

then run the assistant twice, followed by

M117 Hey Hey-ey Goodbye

(SCNR)