The Folger Tech FT-5 has 2z , 2y, 1x. So if I just use the Duetwifi with out the Duex2/5 I will have to connect the Y steppers in series. Can I series the Y steppers without causing problems or should I add the Duex2/5?
Can the E1 be mapped to run second y steppers?
My config above is for a FT5 Z is on the Z port (both connectors).
Heres what I use
M584 X0 Y1:4 Z2 E3 ; Map to specific drives
M569 P0 S0 ; Drive 0 - X
M569 P1 S0 ; Drive 1 - Y
M569 P2 S1 ; Drive 2 - Z
M569 P3 S0 ; Drive 3 - E0
M569 P4 S1 ; Drive 4 - Y
Pics are broken again? Use postimage.org 
Is U showing as in unhomed?
If you do G92 U0 and then try to mesh level does it work?
Here's what i use for reference:
M143 H0 S110 ; Set maximum temperature for bed to 110C
M143 H1 S285 ; Set maximum temperature for hotend to 285C
My fault I was thinking of a different kind of setup!
That wiring is correct.
My bltouch is working perfect and i tried a extreme bed compensation with 1.5 mm high on one side and 1.5 mm low on other side and i got a Perfect first layerBUT is there a code or something so you can "fade" out the compensation. that compensation makes the Z move around and can make ugly prints.
I had that on marlin with my mks board. 3mm was the compensation Then it dont compensate anymore and the print is level.
I have not tried that gcode that fades out in Marlin on my Duet. And i am not on my computer now so i cant see what that gcode is.
Sure is M376 http://reprap.org/wiki/G-code#M376:_Set_bed_compensation_taper
Perhaps the ground should be connected to pin 2 of the expansion connector? I don't have a BLtouch, so perhaps someone else can confirm this.
Correct.
Use https://postimage.io and copy the raw link the the image after upload.
What model are the motors?
Wiring Diagram: https://duet3d.com/wiki/Duet_WiFi_wiring_diagrams
You could also use a multimeter to find out which is A1/2 A1/2.
thanks for the tip ill look into geared bowden are better motor if you have found any you think are cool are work great please share
thanks for your help
If you have the cash http://shop.bondtech.se/ec/extruders/bondtech-qr-175-universal.html
Tony means right click on page that opens as a text file.
You can drive it just with the duet. What SSR are you using? The Croydom mentioned here https://duet3d.com/wiki/Connecting_a_bed_heater#Mains_voltage_AC_bed_heater has never let me down.
Nice. Is there any chance Chris could create a branch for the latest work on DWC and use tags so people can package from source?
I can't agree more.
no changelog, no commit log, no source, this is basically an improper way to distribute OSS software.A changelog including the source files for 1.15 have been pushed to my GitHub repository. The changes since 1.14 were quite vast and I didn't want to officially release a new version before I was sure they were all working, so it took a bit longer than I first expected. In general I agree, though, and will try to push my beta changes right to GitHub when I prepare a new version next time.
Good man. Maybe tag each release as well? Keep up the good work!
A bit off topic but I also suggested to Tony about using Jira for tracking features and bugs which would make keeping track a breeze. It's FOC for open source and very powerful.
I love Atlassian tools, Jira makes it extremely easy to track bugs and features I have also used Confluence, Trello, and Hipchat. Great stuff for dev and test teams.
wouldn't it be great to see a sprint for each release!
