Posts made by jlipavsky79

@T3P3Tony I would love to follow the progress on this because TAMV is good and works really well when it works but sometimes it's really bad, the nozzle has to be pristine and with the coil sensing the metal only would be great, it would just need a macro similar to prusa pinda measuring the magnets in the bed to find their center

@Dep what relay are you using cuz I'm having the same issue, it doesn't happen all the time but its happened a dozen time in the past 6 months

@cdoe You don't by any chance have a link to the resistor that you bought?

did this ever get resolved? looking to do the exact same thing.....

Has any progress been made on this subject?
@dc42 ?

@dc42 hey man, love everything you do for your community and have a question, ok... so I've seen all about the cnc pendants and the paneldue screen with encoder and such but I have a huge 4x8 avid cnc with a duet3 controlboard with a pi4 4gb wired via ribbon cable, I've seen alot of the wireless pendants with usb receiver, ( https://usa-m.banggood.com/Machifit-Wireless-Electronic-CNC-Handwheel-MACH3-6-Axis-Pulse-Pendant-MPG-for-CNC-Engraving-Machine-p-1365963.html?utm_source=googleshopping&utm_source=googleshopping&utm_medium=cpc_organic&utm_medium=cpc_bgs&gmcCountry=US&utm_content=minha&utm_content=frank&utm_campaign=minha-usg-mb&utm_campaign=frank-ssc-us-all-1108&currency=USD&cur_warehouse=CN&createTmp=1&ad_id=395572890419 ) I feel that the potential there is great!!! But.... I'm a mechanical engineer, not a software guy... what are your feelings?

@wilriker Have you gotten this to work in a machine yet?

@AndreS was wondering what ever came of this? i would love to make it .... what do i have to do?

@bearer im a mechanical engineer.... not a software engineer ..... looks like french....

@bearer its missing because it was written for the duetwifi and I'm using the duet 3 so its more so that some of the assignments have changed and the some of the codes reference different codes for the rrf_3

@bearer ok so the workbee-duet.cps i found is working except it doesn't turn on the spindle, I opened the gcode and there wasn't a M3 command and at the end of the file there also wasn't a M5

and mach3 did not work at all

i turned on the spindle by sending a m3 command for the workbee one and it did the cut as it should, so......................... spindle fix?????

@Danal where would i find these?

@jay_s_uk Not the firmware.... the post processor for fusion 360

so i just built the avid cnc 4x8 machine and i decided to go with a duet3 control board to run it because i have duetwifi's on a few printers and love the duet and saw the expandability of the 3 so i ran with it, ive got the machine and all the macros done and it works but now i cant find a post processor that works.....
anyone know of anything i can try?????

@EducatingSavvas Did yyou ever find a solution to this issue?

is this stable for duet3 config?? Also..... im setting up a duet3 as a cnc controler...

How about cnc stuff???? A tab for cnc config like for the spindle speed output setting, for turning on and forward and reverse. Configuring for a vac system for triggering through gcode.... maybe for coolant pumps through gcode..... probing like digitizer probe.....

about to place an order for a duet 3 mainboard for a cnc build and just would like to clarify that the configuration may have a tab for cnc? i feel this is a very worthy tool for the machine and it would unlock many more options for expand ability in the future for maybe tool changing or laser /plasma cutting.... or even 5-6 axis machining