@Corexy said in Mosquito hot end...yes or no?:
Yeah, I'll probably go with the standard Mosquito over the magnum. If I'd have gone E3D V6 I wouldn't bother with the vol
Iirc the standart mosquitto even has a hight max flow then the V6. So i wouldnt mind.
On the other hand -> BMG Mosquitto - the magnum is only 20€. Anyways, i like the combination with a prusa IR sensor for loading and unloading.
@Corexy said in Mosquito hot end...yes or no?:
I'm wondering how the long term longevity and reliability is, and I guess as well whether you felt it was worth the high price.
I havent had any problem with the hotend, yet. The Extruder jammed once, but that was kind of my fault (crappy Geeetech filament)
But! Mind the weight of the "printhead as a whole". I dont find it easy to get rid of ringing, still after a month Im not satisfied with my profiles.
If you want to safe "some" money, consider going the the standart mosquitto. Imho you cant push a V-Core to speeds where you would need a magnum, without your prints looking like shit.
Also, did you use the Slice engineering thermistor, or a PT100?
Slice, same goes for the heater.
Just a question: You lowered your E-Steps because of overextrusion? Why not just lower the flowrate for that filament?
@Corexy As I posted in your other thread: I'm using a Bondtech Prusa BMG with a Mosquitto Magnum on a V-Core Pro.
What do you want to know?
@dc42 said in Email/notifications from Duet wifi:
@Nightreaver said in Email/notifications from Duet wifi:
@dc42 Is there any update on the MQTT progress?
Not yet.
@dc42 Any news on that? 
@Phaedrux said in Layer Count Error:
That's before layer change, layer change, and after layer change. with before and after being blank.
Ahh ok. I understand.
But it also looks like you have Z hop on.
Yes I have, but does it count as a layerchange in DWI?
And in your end gcode you have a z move, but you should make sure you're in G91 relative positioning mode before doing the Z move. That way you can move the extruder up above the print rather than to a fixed position (which may be inside the print).
Actually Im using conditional G-Code in PrusaSlicer for that:
{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ;E - move extruder up
Isnt that kind of like switching to G91? Or am I misunderstanding what youre saying?
@Phaedrux I already did that, but one false layer is still left.
Maybe you could take a look at my second post?!
And Bl-Touch is not an option? @OBELIKS
Im using the BMG Mosquito with a Magnum on my VCore Pro. @Corexy
So now Im down to 76 of the original 75 layers.
35x35_0.4mm_nozzle_flowrate_calibration_0.2mm_PLA_RatRig V-Core Pro_23m.gcode
I think the last wrong layer is the ";before layerchange" G1 Z0.200?!
My before layerchange section is empty in PrusaSlicer. Any tipps on how to fix that?
Ahh ok, now I understand.
Is ;E excluding that line from layer count?
My layer count is way off. Its supposed to be 75 layers.
Maybe someone can tell me, what Im doing wrong.
35x35_0.4mm_nozzle_flowrate_calibration_0.2mm_PLA_RatRig V-Core Pro_23m.gcode
@droftarts Thx.
Didnt want to make it that complicated, I was just trying to help and make it a bit easier for new users like me.
@bearer said in Duet3 Diag constantly flashing:
I believe that was the first result in google; and I was trying to make a point ...
Yes, i know. I didnt google for SD card, but for the problem in my words. And I did not find this... So my idea was just to help others who might be thinking the way I was. But anyways, thanks for your help-
true story: http://google.com/?q=duet+sd+card
In my case this link would have been all I need. Whos taking care the documentaion?
@bearer said in Duet3 Diag constantly flashing:
you could google fat32 recovery but odds are slim.
Sadly i dont get my PC to detect the card. 
But thanks to your help, I got all up and running again. (and I have a backup now! 
)
Sorry, by uploading I meant via SD card. And you were right, but not only the DWI was missing. The whole SD card deleted itself. I dont know how that happend with a pretty new card.
The old card doesnt even show up in windows. Do you have any ideas/experience on that?
I got it back up and running so far, but i dont have a backup of my macros. Any tipps on maybe recovering the old one?
Maybe a hint in the documentation about file structure and how to "rebuild" a SD card if one fails would be nice. (What i did is, just throwing the unzipped config onto the card and putting it back into the printer - now I can tell you: "that doesnt work" haha)
Isnt the /www included if i download the .zip from DWI? Maybe my problem is, that I'm trying to upload without the www and sys?
And after a reboot - timeouted again.
@bearer
Ok, now Im not getting timeouted, instead:
Your Duet rejected the HTTP request: page not found
Check that the SD card is mounted and has the correct files in its /www folder
But i didnt change anything.
i forgot to tell, that the "old" SD card, wouldnt show up in windows.
