Best posts made by luc

I had read about some problems on RRF 3.2.2. As soon as I have a moment I update both of them and hopefully well.
Thanks everyone for the answers.

Hi guys, I can't post anymore it tells me I have to have 2 reputations to post links but I wasn't posting links. What should I do?

@Phaedrux
Thanks for the reply. Having to carefully check all the changelogs is time consuming but it can be done. I was just asking to know if there is anything in particular I should pay attention to. I have read other posts noting issues with WiFi or having to manually delete the old firmware from the old folder and other things. If there are things to pay special attention to I would be happy to read them. Thanks again.

Hello everyone,
due to personal reasons I have not dedicated myself to the printer for several years, and I am asking you for suggestions so that I can upgrade my system.
My configuration with 3 motors for the bed and 2 for the X and Y axes is:
Duet 2 wifi firmware: 3.1.1
Duet expansion
Duet Web control: 3.1.1
Duet WiFi Server Version: 1.23
Panel 2 firmware: 1.23.2
And I would like to upgrade to the latest firmware 3.5.4
I read in the guide that it is preferable to upgrade first to the duet 2 firmware 3.3 and then from 3.3 to 3.5.4 but I was wondering if I need to add or change some command in the config.g file because it is required by the new versions or I can safely upgrade the firmware and not correct the config.g settings

I can add more information if needed.

Thanks
Luciano

@Phaedrux said in Update Duet 2 wifi from 3.1.1 to 3.5.4:

Panel two after a certain time turns off the display (goes to standby) despite from its menu I selected scrennsaver =0);

Can you share a photo of your settings tab on the PanelDue?
I may have solved it by setting "Newer dim"

@luc
To assess whether the motors are the cause, I might try setting a different current.
They are currently set at M906 1700.

Are you thinking of trying a print at 1800 or 1600 or less?