Posts made by luckyflyer

@gloomyandy Thanks I'll check it out.

I have a v.6 1LC tool board that I've had for some time but never put into service. I'm thinking of now putting it into service. Other than the connectors are there any functional differences between the V.6 and the newest 1LC tool board?

Thanks, corrected and working properly now.

I've loaded 2 macros loadzprobe.g and parkzprobe.g to run from my slicer start scripts. I can run these macros by right clicking on the macro and selecting run Macro and they execute ok. I then go to the command line and enter M98 P"loadzprobe.g" and get a macro not found error. I get the error on both macros and when I try to print a file I get an error. What am I doing wrong? Running 3.4

@adammhaile Wow that was too easy, thanks @adammhaile

@chrishamm @MintyTrebor I would like to increase the frame rate. Could you help a Linux dummy out and give me the exact command to enter to change the frame rate. Thanks

@Arnold_R_Clark The problem solved was a rogue g28 in my start script that was giving me grief. When I found it the problem went away. Thanks for the files.

Delete, problem solved.

Thanks for the replies. I'll check out the euclid files. I like the idea of leaving the probe mounted unless printing.

I'm looking for examples of bed.g and especially mesh.g files used by those who use dockable z probes. Maybe @Arnold_R_Clark has somthing, thanks.

@chrishamm, @MintyTrebor Thanks

Any ideas why the grey screen?

Ok, gotta scroll down duh.

I'm trying to update my 5i paneldue since I'm now running v3.4 of dwc. I've downloaded PanelDueFirmware-3.4.1-pre2 and unzipped. Where do I find the 5i binaries? I'm flashing with Bossa on a windows machine.

I have the plugin running and have a grey screen that has a message in the top left corner "unable to open video device". I tried a different (known to work camera) with the same results. I ran lsusb and the ports see the camera. I'm using http://192.168.0.181:8081/0/stream Any ideas? Thanks

@adammhaile Thanks, I tried sudo but without nano but of course that didn't work either.

@chrishamm I ssh into my pi and copy/paste

/etc/apparmor.d/dsf.MotionWebcamServer

I get a permission denied message.

@chrishamm said in Can't connect to cam i/p in dwc:

http://192.168.0.182:8081

@chrishamm Home run, that works, thanks!

New Mexico usa. Shipping would be a killer I'm sure.