Topics created by Mike 0

@droftarts thanks a lot. I know the Zip download. Cool would be one button. I will look in the other options.

By the way, after changing the SD card to a new one, I did not face the issue anymore.

Thanks.

@droftarts Funny enough, I used a 4th USB cable, and it worked. I have fixed the issue and it is running again.

@phaedrux @droftarts Thanks a lot.

@rjenkinsgb The load is not on the GPIO pin. It is on the 5V power supply of the GPIO pin bar, but I guess that power supply is also not strong enough. I did not come around to try it jet, connecting it to main 5V power supply.

I know I can still use the fan output. But I try to avoid it, because I might need them later.

@SignPostMan said in Thermistor Temperatur od T2 and T3 are not correct:

@dc42 said in Thermistor Temperatur od T2 and T3 are not correct:

R2200

Same problem, Same Fix

Firmware 3.4 and later detect the DueX version automatically and adjust the default R parameter for M308 accordingly.