Posts made by mundsen

Hi

Is it possible to mod this controller to get the same 5V PWM out as on the final 6HC controller?

When do you plan to release RC4?

Designed and printed mount for the tool board on my core xy - wireing next!

Is something like this an alternative?

https://www.aliexpress.com/item/32819201617.html?spm=a2g0o.productlist.0.0.6c4e22d80MuYak&algo_pvid=ad45ae30-2fb9-4f57-950c-7ce82b598ece&algo_expid=ad45ae30-2fb9-4f57-950c-7ce82b598ece-0&btsid=0ab50f6115832276850845160e3dd3&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

My toolboard is on it`s way

Is the software ready for it?

My config:
e3d hemera 24V, but with 12V cooling fan
12V filament cooling fan
BLTouch probe

https://forum.lightburnsoftware.com/t/duet-controller-support/11976

Not full RRFW support yet? or is there news in the rrfw 3 that make it work with LightBurn?

@dc42 reat So I can run my Duet 2 WiFi with the latest RRFW 3 in combination with LightBurn ?

I have a 5V PWM laser and plan to use one of the pwm outputs on the Duet 2 extension board

I`m working on a laser where I did plan to use a Duet 2 WiFi

Is there a software like LOightBurn that is compatible with RRFW today?
Or Should I start with an simple grbl controller and wait for RRFW support in LightBurn?

I have DM 856 drivers for the cnc buil!
FB_IMG_1582319371755.jpg

Hi

I have 3 project at the moment

1. A Railcore inspired printer running Duet 3
2. A small diode laser running duet 2 wifi
3. A CNC Where I did plan to use a Pokeys57CNC controller + Mach4

My question is - should I use Duet 2/3 on my CNC?

What software?

Anyone having the stp files for the 3 and 4 pin JST ZH + the 6 pin (stepper output) + the button?

I`m making a simple (not 100% accurate) ToolBoard 3D model that I can use in my designs + when designing a housing for it

@dc42 all 4 wires from duet 3 connected or only 1 and 2

I`m going to use Duet3 + ToolBoard

Then I have to get a RJ11 cable (the cable kit includethe other wires I need?)
Add a 5A (car fuse) for the power wires
Terminate the CanBus using a 120 Ohm resistor? where? between pin 3-4?

@CaLviNx Agree - ToolBoard is the missing part on my printer

So then I can install the distribution board at the printer top-right side (A) and the toolboard at the top of the hemera (B) ?

@dc42 said in Duet 3 Mainboard 6HC - initial production run.:

distribution

Any price info on the distribution board?

I may order ToolBoard + distribution board - so I`m ready for more projects in the future

@dc42 Do I need the distribution board if I`m going to use only one Tool Board?
Does the toolboard include wire terminals for the CAN bus (+ the other not using screw terminals) wires between the ToolBoard and the Duet 3?

@dc42 said in Duet 3 Tool Board - Available?:

1725672

When I`m at it - possible to get the other terminals used + buttons?

@dc42 do you have the part name/number for the screw terminal used? So I can ask them to my 3d model

Designing in Fusion360 - made a simple toolboard template. Next I have to make the holes in the top cover.